Silicones, silicone oils, sprays
Casting and potting resins)
)
LOCTITE AA 307 Anaerobic Adhesive
LOCTITE AA 307: Anaerobic curing adhesive for tightly fitting metal parts. Check suitability using the Henkel data sheet.
Documents
HS Code:
35061000
According to the Henkel datasheet, LOCTITE AA 307 is a one-component, anaerobically curing adhesive for tightly fitting metal parts. It cures in the absence of air with a suitable activator. The previous description as a UV adhesive for plastic and glass was incorrect.
Note regarding technical data: The Technical Data tab still contains conflicting older values. Please do not use these for design purposes. We will review the current Henkel data sheet and its suitability for your application with you.
Technical data for LOCTITE AA 307 Anaerobic Adhesive
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 50 ml, 250 ml |
| UFI (Unique Formula Identifier) | J783-H0CR-7000-KV15 |
| Product type | UV-curing acrylic adhesive |
| Temperature range (°C) | -40 °C to +80 °C |
| Suitable for | PC, PET, SAN, glass |
| Chemical resistance | Good |
| Physical Properties | |
|---|---|
| Color | transparent |
| Viscosity at 25°C | 500–700 mPa·s |
| Curing technology | UV light (320–390 nm) |
| Hand strength | 4–10 seconds |
| Tensile shear strength PC/PC | 10 N/mm² |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | up to 0.5 mm |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 50 ml or 250 ml |
| Brand | Loctite |
| UFI (Unique Formula Identifier) | J783-H0CR-7000-KV15 |
| Product type | UV-curing acrylic adhesive |
| Temperature range (°C) | -40 °C to +80 °C |
| Suitable for | PC, PET, SAN, glass |
| Chemical resistance | Good |
| Physical Properties | |
|---|---|
| Color | transparent |
| Viscosity at 25°C | 500–700 mPa·s |
| Curing technology | UV light (320–390 nm) |
| Hand strength | 4–10 seconds |
| Tensile shear strength PC/PC | 10 N/mm² |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | up to 0.5 mm |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: