Silicones, silicone oils, sprays
Casting and potting resins)
PERMABOND CA Solvent 2
Cyanoacrylate remover, solvent based on organic esters; removes hardened cyanoacrylate adhesive.
For thick beads/drops, allow 15–30 minutes of contact time with reapplication; bonded parts may need to be soaked for several hours. Flash point > 100 °C
PERMABOND CA Solvent 2 is used to remove cured cyanoacrylate residues. Check material compatibility and safe handling using the current documentation.
PERMABOND CA Solvent 2 is an organic ester-based solvent for removing cured cyanoacrylate residues. Permabond describes it as non-flammable and less aggressive than acetone or nitromethane. Suitability for the material in question, as well as storage and protective measures, must be checked before use using the current product documentation and the safety data sheet.
Manufacturer's instructions for removing adhesives · Request packaging and a quote
Technical data for PERMABOND CA Solvent 2
| Product Information | |
|---|---|
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 150 ml, 1 l |
| Chemical Base | Organic esters |
| Physical Properties | |
|---|---|
| Color | colorless |
| Specific Gravity | 1.05 |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 5-25 |
| General | |
|---|---|
| Viscosity @20°C | <20 mPa.s |
| Flashpoint | >+100°C |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 150 ml or 1 l |
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Chemical Base | Organic esters |
| Physical Properties | |
|---|---|
| Color | colorless |
| Specific Gravity | 1.05 |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 5-25 |
| Uncategorized | |
|---|---|
| Viscosity @20°C | <20 mPa.s |
| Flashpoint | >+100°C |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: