Skip to content

SILISILsilicone products

SILISIL DEADNER

Transparent additive for adjusting the hardness of suitable addition silicones. Viscosity 2,000 mPa·s and density 0.97 g/cm³ at 23 °C.
Cured Color
Transparent
Self-leveling
Yes
Density (g/cm³)
0.97
Uncrosslinked viscosity (mPa·s)
2000

  • Brand
  • Color cured - Transparent
  • Food contact
  • Self-leveling
  • Medical grade
  • Density (g/cm³)
  • Uncrosslinked viscosity (mPa·s)
  • Curing type
  • Certificates
  • Container
Your selection SILISIL DEADNER
General terms and conditions of business

HS Code: 3910.0000

SILISIL DEADNER Sample Offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Product Information

Brand
SILISIL
Curing type
Addition (Platinum)
Container
250 ml, 1 kg, 5 kg

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Density (g/cm³)
0.97
Uncrosslinked viscosity (mPa·s)
2000

Product Approvals

Food contact
No
Medical grade
No
Certificates
RoHS, REACH
Keywords
  • SILISIL
  • Silicone
  • Silicone additive
  • Swiss warehouse
  • Swiss brand
  • 2K

Product Description

SILISIL DEADNER is used to adjust the hardness of suitable addition-curing silicones. The effect and the required amount depend on the silicone system and the desired feel.

Technical specifications

AppearanceTransparent
Dynamic viscosity at 23 °C2’000 mPa·s
Density at 23 °C0.97 g/cm³

Processing

Weigh out the base, catalyst, and the required amount of DEADNER for the specific silicone system and mix thoroughly. Follow the mixing instructions for the silicone system. Test the desired hardness and mechanical strength on the cured test piece.

Refer to the safety data sheet before processing. Reseal the container after use.