Skip to content

SILISILRTV-2 silicones

SILISIL RTV MD-Soft 10

Soft, translucent 2-component silicone for special effects and elastic molded parts. Shore A 10; 1:1 by weight; working time 12 min at 23 °C.
Cured Color
Translucent
Self-leveling
Yes
Uncrosslinked viscosity (mPa·s)
10'000
Mixing Ratio
1:1

  • Brand
  • Color cured - Translucent
  • Food contact
  • Shore hardness A (cured)
  • Self-leveling
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Elongation at break (%)
  • Curing type
  • Container
Your selection SILISIL RTV MD-Soft 10
General terms and conditions of business

HS Code: 3910.0000

SILISIL RTV MD-Soft 10 Sample Offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Product Information

Brand
SILISIL
Mixing Ratio
1:1
Curing type
Addition (Platinum)
Container
1kg+1kg, 5kg+5kg, 10kg+10kg, 25kg+25kg

Physical Properties

Cured Color
Translucent
Self-leveling
Yes
Uncrosslinked viscosity (mPa·s)
10'000

Curing values

Pot life (min)
12
Demolding time (min)
40

Product Approvals

Food contact
No

Mechanical properties

Shore hardness A (cured)
A 10
Elongation at break (%)
650
Keywords
  • SILISIL
  • Silicone
  • RTV-2
  • Swiss warehouse
  • Addition
  • Platinum
  • Swiss brand
  • 2K
  • Medical Dental
  • Medical grade
  • Dental
  • Skin-compatible
  • Shore A 10

Product Description

SILISIL RTV MD-Soft 10 is an addition-curing, two-component silicone for soft, elastic parts and special effects. It vulcanizes at room temperature and achieves a Shore A hardness of 10.

Technical guidelines

Mixing Ratio1:1 by weight
viscosity of the mixture10,000 mPa·s, Brookfield
Processing time at 23 °C12 min
Setting time at 23 °C40 min
Hardness after 24 hours at 23 °CShore A 10
Tensile Strength3.3 N/mm²
Elongation at break650 %
Tear resistance14 N/mm

Processing

Homogenize both components before use, weigh them precisely, and mix thoroughly, including the edges and bottom. Use matching base and catalyst from the same batch. Processing and setting times are based on 23°C; higher temperatures will shorten them.

Applications involving body contact

Biological tests for defined contact conditions are available for the underlying manufacturer's quality, ZA SFX 10 WT 10. For a medical device, the complete test reports, processing, and intended use of the finished product must be evaluated together. Pigmentation, additives, and sterilization can influence this evaluation.