HS Code:
3910.0000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Mixing Ratio
- 1:1
- Curing type
- Addition (Platinum)
- Container
- 1kg+1kg, 5kg+5kg, 10kg+10kg, 25kg+25kg
- Brand
- SILISIL
- Mixing Ratio
- 1:1
- Temperature range (°C)
- -40°C to 200°C
Physical Properties
- Cured Color
- Green
- Self-leveling
- Yes
- Density (g/cm³)
- 1.1
- Uncrosslinked viscosity (mPa·s)
- 5000
Curing values
- Pot life (min)
- 50
- Demolding time (min)
- 240
Product Approvals
- Food contact
- No
- Medical grade
- No
Mechanical properties
- Shore hardness A (cured)
- A 30
- Tensile strength (MPa)
- 5
- Elongation at break (%)
- 450
- Tensile strength (N/mm)
- 15
Product Description
SILISIL RTV MF-Dura 30 is a pourable silicone for mold making and the reproduction of models with undercuts. It cures by addition and is processed as a two-component system.
Technical guidelines
| Mixing Ratio | 1:1 by weight |
|---|---|
| Color | Green |
| viscosity of the mixture | 5,000 mPa·s |
| Density at 23 °C | 1.1 g/cm³ |
| Processing time at 23 °C | 50 min |
| Setting time at 23 °C | 240 min |
| Hardness after 24 hours at 23 °C | 30 Shore A |
| Tensile Strength | 5 N/mm² |
| Elongation at break | 450 % |
| Tear resistance | 15 N/mm (Die B) |
Processing
Measure the corresponding components precisely by weight and mix thoroughly. Use clean, dry mixing equipment and include the container walls and bottom in the mixing process. The times given are based on a temperature of 23 °C; processing begins once the components have been combined.
The mechanical properties are guide values based on material vulcanized after 24 hours at 23 °C. Before processing, read the safety data sheets of both components and test the material combination in a preliminary trial.