Skip to content

SILISILRTV-2 silicones

SILISIL RTV MF-Soft 12

Pourable silicone for pad printing. Addition curing; 1:1 by weight; working time at 23 °C: 20 min.
Cured Color
Blue
Self-leveling
Yes
Density (g/cm³)
1.1
Uncrosslinked viscosity (mPa·s)
3500

  • Brand
  • Paint hardened - Blue
  • Food contact
  • Shore hardness A (cured)
  • Self-leveling
  • Medical grade
  • Density (g/cm³)
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Tensile strength (MPa)
  • Elongation at break (%)
  • Curing type
  • Container
Your selection SILISIL RTV MF-Soft 12
General terms and conditions of business

HS Code: 3910.0000

SILISIL RTV MF-Soft 12 Sample Offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Product Information

Brand
SILISIL
Mixing Ratio
1:1
Curing type
Addition (Platinum)
Container
1kg+1kg, 5kg+5kg, 10kg+10kg, 25kg+25kg

Physical Properties

Cured Color
Blue
Self-leveling
Yes
Density (g/cm³)
1.1
Uncrosslinked viscosity (mPa·s)
3500

Curing values

Pot life (min)
20
Demolding time (min)
90

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Shore hardness A (cured)
A 12
Tensile strength (MPa)
3
Elongation at break (%)
550
Keywords
  • Mold Making
  • SILISIL
  • Silicone
  • RTV-2
  • Swiss warehouse
  • Addition
  • Platinum
  • Prototyping
  • Shore A 12
  • Swiss brand
  • 2K
  • Moulding / Toolmaking

Product Description

SILISIL RTV MF-Soft 12 is a pourable silicone for pad printing. It cross-links through addition and is processed as a two-component system.

Technical guidelines

Mixing Ratio1:1 by weight
ColorBlue
viscosity of the mixture3'500 mPa·s
Density at 23 °C1.1 g/cm³
Processing time at 23 °C20 min
Setting time at 23 °C90 min
Hardness after 24 hours at 23 °C12 Shore A
Tensile Strength3 N/mm²
Elongation at break550 %
Tear resistance8.6 N/mm (Die B)

Processing

Measure the corresponding components precisely by weight and mix thoroughly. Use clean, dry mixing equipment and include the container walls and bottom in the mixing process. The times given are based on a temperature of 23 °C; processing begins once the components have been combined.

The mechanical properties are guide values ​​based on material vulcanized after 24 hours at 23 °C. Before processing, read the safety data sheets of both components and test the material combination in a preliminary trial.