Skip to content

SILISILRTV-2 silicones

SILISIL RTV MF-Ultra 60

Addition-curing silicone for mold making. Addition-curing; 10 parts CATALYST : 1 part BASE by weight; working time at 23 °C: 60 min.
Cured Color
Blue
Self-leveling
Yes
Mixing Ratio
10:1 (CATALYST:BASE, weight)
Curing type
Addition (Platinum)

  • Brand
  • Paint hardened - Blue
  • Food contact
  • Shore hardness A (cured)
  • Self-leveling
  • Medical grade
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Elongation at break (%)
  • Curing type
  • Container
Your selection SILISIL RTV MF-Ultra 60
General terms and conditions of business

HS Code: 3910.0000

SILISIL RTV MF-Ultra 60 Sample Offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Product Information

Brand
SILISIL
Mixing Ratio
10:1 (CATALYST:BASE, weight)
Curing type
Addition (Platinum)
Container
500g + 5kg, 2.5kg + 25kg, 20kg + 200kg

Physical Properties

Cured Color
Blue
Self-leveling
Yes

Curing values

Pot life (min)
60
Demolding time (min)
1440

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Shore hardness A (cured)
A 58
Elongation at break (%)
200
Keywords
  • Mold Making
  • SILISIL
  • Silicone
  • RTV-2
  • Swiss warehouse
  • Addition
  • Platinum
  • Shore A 60
  • Prototyping
  • Swiss brand
  • 2K
  • Moulding / Toolmaking

Product Description

SILISIL RTV MF-Ultra 60 is an addition-curing silicone for mold making. It cures by addition and is processed as a two-component system.

Technical guidelines

Mixing Ratio10 parts CATALYST : 1 part BASE according to weight
ColorBlue
Processing time at 23 °C60 min
Setting time at 23 °C1,440 min
Hardness after 24 hours at 23 °C58 Shore A
Tensile Strength5 N/mm²
Elongation at break200 %
Tear resistance10 N/mm (Die B)

Processing

Measure the corresponding components precisely by weight and mix thoroughly. Use clean, dry mixing equipment and include the container walls and bottom in the mixing process. The times given are based on a temperature of 23 °C; processing begins once the components have been combined.

When weighing, note the component names on the containers: 100 g CATALYST are mixed with 10 g BASE.

The mechanical properties are guide values ​​based on material vulcanized after 24 hours at 23 °C. Before processing, read the safety data sheets of both components and test the material combination in a preliminary trial.