Skip to content

Silicone Oils & Fluids

SILISIL Silicone Oil 0.65 cSt

Very low viscosity, volatile silicone fluid: Hexamethyldisiloxane, 0.65 cSt at 25 °C. Highly flammable liquid and vapor; for industrial use only. Refer to the safety data sheet.

Viscosity (cSt)
0.65 cSt
Density (g/cm³)
0.760 g/cm³
Viscosity (silicone oils)
Low-viscosity silicone oils: 0.65 cSt (more fluid than water) to 10 cSt (almost water-thin)
Curing type
Non-reactive

  • Food contact
  • Medical grade
  • Viscosity (cSt)
  • Density (g/cm³)
  • Flash point (°C)
  • Pour point (°C)
  • Curing type
  • Electrical Insulation
  • Viscosity (silicone oils)
  • Container
Your selection SILISIL Silicone Oil 0.65 cSt
General terms and conditions of business

HS Code: 39100000

SILISIL Silicone Oil 0.65 cSt sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Product Information

Curing type
Non-reactive
Viscosity (silicone oils)
Low-viscosity silicone oils: 0.65 cSt (more fluid than water) to 10 cSt (almost water-thin)
Container
100g, 1kg, 2kg, 10kg, 20kg, 150kg, 950kg

Physical Properties

Viscosity (cSt)
0.65 cSt
Density (g/cm³)
0.760 g/cm³

Electrical Properties

Electrical Insulation
Yes

Product Approvals

Food contact
No
Medical grade
No

Thermal Properties

Flash point (°C)
-1 °C (closed crucible)
Pour point (°C)
-68 °C
Keywords
  • SILISIL
  • Silicone
  • Silicone Oil
  • Silicone Fluid
  • PDMS
  • Swiss warehouse
  • polydimethylsiloxane
  • 1K
  • non-reactive
  • Release Agent
  • Lubricant
  • Ultra-Low Viscosity
  • Cosmetic carrier fluid
  • Swiss brand
  • 0.65 cSt

Product Description

SILISIL Silicone Oil 0.65 cSt: volatile silicone fluid

SILISIL Silicone Oil 0.65 cSt is a very low-viscosity, volatile silicone fluid based on hexamethyldisiloxane (disiloxane), CAS 107-46-0. Its kinematic viscosity is 0.65 mm²/s at 25 °C. It is intended for industrial applications.

Safe handling

Highly flammable liquid and vapor. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. Take precautions against static discharge and use the device specified in the safety data sheet. Avoid release into waterways and sewers.

The supplier's safety data sheet specifies a flash point of −1 °C and storage conditions of 5–30 °C. Store containers tightly closed, in a cool and well-ventilated place. A flash point describes a test property; it is not a permissible processing temperature.

Select application

The fluid can be used as a volatile component in specially designed industrial formulations. Evaporation, compatibility, and residues must be tested on the intended setup. The choice of formulation depends on the specific quality requirements, the other components, and the requirements of the final product.

Read the safety data sheet before processing. Inquire with SILITECH about packaging, delivery conditions, and the documents required for your application.

Technical inquiry regarding SILISIL Silicone Oil 0.65 cSt