HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 1 kg, 5 kg, 25 kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 3000 cSt
- Density (g/cm³)
- 0.973 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- >300 °C
- Pour point (°C)
- -48 °C
Product Description
SILISIL Silicone Oil 3000 cSt is a high-viscosity PDMS for specialized lubrication, damping, and care applications.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
3'000 cSt bridges the gap between 1'000 and 5'000 cSt — higher lubricating film stability for special industrial applications, while still flowable.
What sets SILISIL Silicone Oil 3000 cSt apart
What is SILISIL Silicone Oil 3000 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 3000 cSt in direct comparison with related viscosities from our range.
3,000 cSt Current Product |
1000 cSt → | 5000 cSt → | 10'000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 3'000 | 1'000 | 5'000 | 10'000 |
| Main application | Specialized lubrication | Demanding Industrial Lubrication | Industrial Dampers | Vibration dampers automotive |
Frequently Asked Questions about SILISIL Silicone Oil 3000 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 3000 cSt: High-viscosity PDMS for specialized lubrication, damping, and care applications. Main applications include specialty lubrication, premium hydraulic damping, and professional mold release agents.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 3'000 cSt is optimal for: specialty lubrication and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.