)
BLUESIL Fluid 47 V 500
Linear PDMS oil.
Linear PDMS oil (500 mm²/s) — higher viscosity for demanding lubrication, separation and maintenance applications with greater film thickness
Documents
HS Code:
39100000
Bluesil Fluid 47 V 500 is a linear PDMS oil (500 mm²/s) — higher viscosity for demanding lubrication, separation and maintenance applications with greater film thickness.
Bluesil/Silbione polydimethylsiloxane oils (PDMS) — chemically inert, thermally stable, with defined viscosity, suitable for use as lubricants, separators, dielectrics, hydraulic fluids, and heat transfer fluids. Fluid 47 V 500 is tailored to specific applications — the most important properties and areas of use are listed below.
Bluesil FLD 47V500 offers a thicker lubricating and separating film than the low-viscosity variants — proven for more demanding lubrication tasks and long-term separation effect.
What distinguishes Fluid 47 V 500
What is Fluid 47 V 500 used for?
Processing
Fluid 47 V 500 in comparison
Direct comparison with related fluid products from our range. "— " = not specified in the data sheet.
Fluid 47 V 500 Current Product |
Fluid 47 V 350 → | Fluid 47 V 1000 → | Fluid 47 V 5000 → | |
|---|---|---|---|---|
| Product Type | PDMS, linear | PDMS, linear | PDMS, linear | PDMS, linear |
| Viscosity @25 °C | 500 mm²/s | 350 mm²/s | 1,000 mm²/s | 5,000 mm²/s |
| Density @25 °C | 0.970 | 0.970 | 0.970 | 0.970 |
| Flash point | ≥+300 °C | ≥+300 °C | ≥+300 °C | ≥+300 °C |
| Pour point | −50 °C | −50 °C | −50 °C | −50 °C |
| Refractive index | 1.403 | 1.403 | 1.403 | 1.403 |
| Main application | Lubricants / Release agents | Universal release agent / RTV thinner | Care product / RTV plasticizer | Antifoam / Special Lubrication |
Technical data for BLUESIL Fluid 47 V 500
| Product Information | |
|---|---|
| Brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Container | 1 kg, 5 kg, 25 kg, 200 kg |
| Number of components | 1K (one-component) |
| Consistency | Flowable |
| Mixing Ratio | One-component |
| Further Properties | |
|---|---|
| UV resistance | Yes |
| Physical Properties | |
|---|---|
| Cured Color | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 500 cSt |
| Density (g/cm³) | 0.970 g/cm³ |
| Uncrosslinked viscosity (mPa·s) | 5 |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | No |
| Medical grade | No |
| Thermal Properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Pour point (°C) | -50 °C |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Documents and data sheets
Click on a document for the preview or the download icon for direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Fluid 47 V 500
Practical application and design questions — answered by SILITECH.
Bluesil Fluid 47 V 500: Linear PDMS oil (500 mm²/s) — higher viscosity for demanding lubrication, release, and maintenance applications with greater film thickness. Main applications: release agents, lubricants, maintenance products.
PDMS (Polydimethylsiloxane) is a linear silicone fluid with high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (in mm²/s = cSt) determines the field of application — low viscosities for volatile lubrication and hydraulics, high viscosities for antifoam, damping, and care conditioning.
Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.
In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 1 kg or 5 kg or 25 kg or 200 kg |
| Brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Number of components | 1K (one-component) |
| Consistency | Flowable |
| Mixing Ratio | One-component |
| Further Properties | |
|---|---|
| UV resistance | Yes |
| Physical Properties | |
|---|---|
| Cured Color | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 500 cSt |
| Density (g/cm³) | 0.970 g/cm³ |
| Uncrosslinked viscosity (mPa·s) | 5 |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | No |
| Medical grade | No |
| Thermal Properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Pour point (°C) | -50 °C |
| Keywords | |
|---|---|
| Keywords | |
| Processing | |
|---|---|
| Viscosity of Mixture | 500 mPa·s |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 0.97 g/cm³ |
| Flash point | 300.0 °C |
| Refractive index n (20°C) | 1.403 |
| Temperature Resistance (Continuous) | -50 to 200 °C |
| Peak Temperature (Short-term) | 200 °C |
| Thermal conductivity | 0.16 W/(m·K) |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 2.8 |
| Dielectric strength | 16.0 kV/mm |
| Volume resistivity | 1e+15 Ω·cm |
| Storage | |
|---|---|
| Shelf life in original packaging | 36 months |
| Storage Temperature | -20 to 50 °C |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download:
- Bluesil FLD 47V500 - Fiche Technique FR.pdf (138 KB)
- Bluesil FLD 47V500 - Fiche de Sécurité FR.pdf (375 KB)
- Bluesil FLD 47V500 - Scheda di Sicurezza IT.pdf (370 KB)
- Bluesil FLD 47V500 - Safety Data Sheet DE.pdf (185 KB)
- Bluesil FLD 47V500 - Technical Data Sheet EN.pdf (447 KB)
- Bluesil FLD 47V500 - Technical Data Sheet DE.pdf (134 KB)