Skip to content

BluesilRTV-2 silicones

BLUESIL RTV 141 A (25 kg)

Transparent, optically clear 2K-Pt silicone potting compound (Shore A 50) for embedding electronic components, optical fibers and barrier photocells

Temperature range
-70 to 200 °C
Hardness
50 Shore A
Viscosity
4,000 mPa·s
Viscosity A
3'500 mPa·s

  • Brand
  • Color cured - Transparent
  • Food contact
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Tensile strength (MPa)
  • Elongation at break (%)
  • Tensile strength (N/mm)
  • Curing type
  • Electrical Insulation
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
Your selection BLUESIL RTV 141 A (25kg) 40-905.KE.K025
General terms and conditions of business

Internal reference: 40-905.KE.K025
HS code: 39100000

BLUESIL RTV 141 A (25kg) sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Mechanical properties

Shore hardness A
50 Shore A
Tensile Strength
6 MPa
Elongation at break
120 %
Linear shrinkage
< 1.2 %

Processing

Viscosity of Mixture
4,000 mPa·s
Viscosity Component A
3'500 mPa·s
Viscosity Component B
650 mPa·s
Pot life at 23 °C
240 min
Demolding time
2,160 min

Physical and thermal

Density (23 °C)
1.02 g/cm³
Temperature resistance (duration)
-70 to 200 °C
Peak temperature (briefly)
200 °C
Refractive index n (20 °C)
1.406
Thermal conductivity
0.16 W/(m·K)

Electrical characteristics

Dielectric strength
20 kV/mm
Volume resistivity
10¹⁵ Ω·cm
Dielectric constant ε (1 kHz)
2.7
Dissipation factor tan δ
0.001

Storage

Shelf life in original packaging
24 months
Storage Temperature
-5 to 30 °C

Product Information

Brand
Bluesil
Manufacturer
Elkem Silicones
Mixing Ratio
A : B = 10 : 1
Curing type
Addition (Platinum)
Number of components
2K (two-component)
Consistency
Flowable
Mixing Ratio
10:1

Further Properties

UV resistance
No

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Uncrosslinked viscosity (mPa·s)
25'000

Electrical Properties

Electrical Insulation
Yes

Curing values

Pot life (min)
240
Demolding time (min)
1440 to 2880

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Tensile strength (MPa)
6.5
Elongation at break (%)
500
Tensile strength (N/mm)
21
Keywords
  • Transparent
  • Silicone
  • BLUESIL
  • 2K Silicone
  • ELKEM
  • Swiss warehouse
  • Electrical Insulation
  • RTV
  • Addition
  • Platinum
  • Electronics potting
  • Optoelectronics
  • Light guides
  • optical clarity
  • Base component

Product Description

BLUESIL RTV 141 A&B E5 is a two-component, addition-curing RTV-2 silicone that cures at room temperature to a transparent elastomer and is used for potting and protecting electronic and optoelectronic components.

After mixing the two components, BLUESIL RTV 141 A&B E5 forms a relatively low-viscosity, colorless liquid that cures into an elastic, transparent material. The reaction does not release heat, and curing can be accelerated by heating.

Transparent potting

Addition-curing RTV-2 silicone with good optical transmission and good pourability, designed for the protection and insulation of light-sensitive and optoelectronic components.

RTV 141 in figures
2K
Addition-curing
A 50
Shore A hardness
100:10
Mixing ratio A:B
4 h
Pot life at 25 °C

What sets RTV 141 apart

Transparent
Good optical transmission, the cured material is transparent.
Good pourability
Low viscosity of the mixture of approx. 4000 mPa·s for easy filling.
Fillers possible
The addition of fillers is possible.
Reversion resistant
Good reversion resistance even in enclosed spaces.
No reaction heat
The addition curing does not release heat during curing.

What is RTV 141 used for?

Potting electronics
Coating or encapsulation protection for electronic components and electrical devices.
Optoelectronics
Optoelectronic connections
Light-sensitive cells
Isolation of light-sensitive cells.
Optical fibers
Encapsulation of step-index optical fibers.
Data sheet and safety data sheet
View or download the Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
To the documents →

Processing

1
Mixing
Add 10 parts of RTV 141 B E5 to 100 parts of RTV 141 A E5 and mix thoroughly at low speed to minimize air entrapment.
2
Degassing
Degas the mixture in a vacuum at 30 to 50 mbar and interrupt the vacuum several times; this product requires particularly long degassing.
3
Casting
Pour slowly and evenly, starting from the lowest point for thick layers, and do not fill completely to allow for expansion during operation.
4
Curing
Demoldable at 23 °C after approx. 24 to 48 hours, or accelerated: 4 hours at 60 °C, 2 hours at 100 °C, or 1 hour at 150 °C.

Important Notes

  • Curing may be inhibited by contact with sulfur-containing rubbers, metal salt-catalyzed RTV, tin-stabilized PVC, or amine-cured epoxies; if in doubt, test beforehand.
  • Curing at room temperature results in low linear shrinkage (approx. 0.4%), but prevents the vulcanizate from achieving its optimal mechanical properties.
  • The currently valid Elkem data sheet (TDS and SDS) is authoritative, which we will be happy to send you.

Frequently Asked Questions about RTV 141

Practical application and design questions, answered by SILITECH.

100 parts RTV 141 A E5 to 10 parts RTV 141 B E5 (parts).

The pot life of the catalyzed mixture is approx. 4 h at 25 °C.

Yes, degassing at 30 to 50 mbar is recommended to avoid air bubbles; the product must be degassed for a particularly long time.

Adhesion is achieved on most substrates with the primer PRIM PMB 821; the potting should be carried out within four hours after the primer has dried.