Skip to content

BluesilRTV-2 silicones

BLUESIL RTV 3041 A

Transparent 2K addition-cure silicone rubber (Pt) for high-precision reproduction of 3D objects — also available in the SB (Self-Bleeding) version

Temperature range
-54 to 204 °C
Hardness
38 Shore A
Viscosity
42’000 mPa·s
Viscosity A
50’000 mPa·s

  • Brand
  • Color cured - Transparent
  • Food contact
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Density (g/cm³)
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Tensile strength (MPa)
  • Elongation at break (%)
  • Tensile strength (N/mm)
  • Curing type
  • Electrical Insulation
  • Container
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
Your selection BLUESIL RTV 3041 A 40-3041A
General terms and conditions of business

Internal reference: 40-3041A
HS code: 39100000

BLUESIL RTV 3041 A sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Mechanical properties

Shore hardness A
38 Shore A
Tensile Strength
5.5 MPa
Elongation at break
350 %
Tear resistance
22 kN/m
Linear shrinkage
< 0.1 %

Processing

Viscosity of Mixture
42’000 mPa·s
Viscosity Component A
50’000 mPa·s
Viscosity Component B
6’000 mPa·s
Pot life at 23 °C
75 min
Demolding time
1,440 min

Physical and thermal

Density (23 °C)
1.08 g/cm³
Temperature resistance (duration)
-54 to 204 °C
Peak temperature (briefly)
204 °C

Storage

Shelf life in original packaging
12 months
Storage Temperature
-10 to 30 °C

Product Information

Brand
Bluesil
Manufacturer
Elkem Silicones
Mixing Ratio
10 : 1
Curing type
Addition (Platinum)
Container
1 kg, 5 kg, 20 kg, 200 kg
Number of components
2K (two-component)
Consistency
Flowable
Mixing Ratio
10:1

Further Properties

UV resistance
No

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Density (g/cm³)
1.08
Uncrosslinked viscosity (mPa·s)
50'000

Electrical Properties

Electrical Insulation
No

Curing values

Pot life (min)
75
Demolding time (min)
24

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Tensile strength (MPa)
5.5
Elongation at break (%)
350
Tensile strength (N/mm)
22
Keywords
  • Epoxy
  • Transparent
  • Mold Making
  • Silicone
  • BLUESIL
  • Polyester
  • Molding silicone
  • 2K Silicone
  • ELKEM
  • Swiss warehouse
  • RTV
  • Addition
  • Platinum
  • Base component
  • Prototyping
  • Polyurethane
  • 3D reproduction
  • RTV 3041
  • Jewelry making
  • Wachs

Product Description

RTV 3041: Two-component addition-curing silicone elastomer, available in several versions (A+B standard, A+B SB self-degassing), transparent.

RTV 3041 belongs to the BLUESIL RTV series from Elkem, the two-component silicones for mold making and molding. Technology: Addition curing (platinum, 2K). Sales segment: Series prototyping.

RTV 3041 at a glance

Two-component addition-curing silicone elastomer, available in several versions (A+B standard, A+B SB self-degassing), transparent.

RTV 3041 in figures
2K
Addition
A 38
Shore Hardness
10:1
Mixing ratio

What sets RTV 3041 apart

High-precision reproduction
High-precision reproduction
Transparency
Very good transparency
Outstanding mechanical properties
outstanding mechanical properties
Full compatibility within
full compatibility within the product line.

What is RTV 3041 used for?

3D molding of objects
3D molding of objects made of polyurethane, wax, foam, epoxy, polyester.
Data sheet and safety data sheet
View or download the Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
To the documents →

Processing

1
Mix components
Mix parts A and B in the specified ratio with minimal air entrapment.
2
Processing
Apply or join within the pot life.
3
Curing
Cure at room temperature, can be accelerated by heat.
4
Check suitability
Before series use, test adhesion and suitability on the component.

Important Notes

  • The currently valid Elkem data sheet (TDS and SDS) is authoritative, which we will be happy to send you.

RTV 3041 in comparison

RTV 3041
Current Product
RTV 3325 (+ catalyst) →RTV 3428 →RTV 3440 / 3445 / 3450 / 3450 QC →
CrosslinkingAdditionCondensationAdditionAddition
Colortranslucentwhitewhitetranslucent
Shore A38252840 to 50
Duration °Cn.a.n.a.n.a.n.a.

Frequently Asked Questions about RTV 3041

Practical application and design questions, answered by SILITECH.

RTV 3041 is suitable for 3D molding of objects made of polyurethane, wax, foam, epoxy, and polyester.

RTV 3041: Addition-curing (platinum, 2K).