Skip to content

Elkem SiliconesRTV-2 silicones

BLUESIL RTV 8352 LV A

Medium-hard 2K-Pt silicone potting compound (Shore A 55, whitish) with 1:1 mixing ratio for electrical coatings and encapsulation applications

Temperature range
-50 to 200 °C
Hardness
55 Shore A
Viscosity
2’200 mPa·s
Viscosity A
2’200 mPa·s

  • Color cured - Transparent
  • Food contact
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Tensile strength (MPa)
  • Elongation at break (%)
  • Curing type
  • Electrical Insulation
  • Container
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
  • Brand
Your selection BLUESIL RTV 8352 LV A
General terms and conditions of business

HS Code: 39100000

BLUESIL RTV 8352 LV A sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Mechanical properties

Shore hardness A
55 Shore A
Tensile Strength
2.3 MPa
Elongation at break
78 %
Linear shrinkage
< 0.1 %

Processing

Viscosity of Mixture
2’200 mPa·s
Viscosity Component A
2’200 mPa·s
Viscosity Component B
2’200 mPa·s
Pot life at 23 °C
130 min
Demolding time
480 min

Physical and thermal

Density (23 °C)
1.41 g/cm³
Temperature resistance (duration)
-50 to 200 °C
Peak temperature (briefly)
200 °C

Electrical characteristics

Volume resistivity
1.4 × 10¹⁵ Ω·cm
Dielectric constant ε (1 kHz)
3.6
Dissipation factor tan δ
0.002

Storage

Shelf life in original packaging
6 months
Storage Temperature
-5 to 30 °C

Product Information

Manufacturer
Elkem Silicones
Mixing Ratio
1:1
Curing type
Addition (Platinum)
Container
400ml, 1kg, 5kg, 25kg, 200kg
Number of components
2K (two-component)
Consistency
Flowable
Mixing Ratio
1:1
Brand
Bluesil

Further Properties

UV resistance
No

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Uncrosslinked viscosity (mPa·s)
2

Electrical Properties

Electrical Insulation
Yes

Curing values

Pot life (min)
130
Demolding time (min)
8

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Tensile strength (MPa)
2.3
Elongation at break (%)
78
Keywords
  • Silicone
  • BLUESIL
  • 2K Silicone
  • Low Viscosity
  • ELKEM
  • Swiss warehouse
  • Electrical Insulation
  • RTV
  • Addition
  • Platinum
  • Electronics potting
  • Base component
  • 200 kg
  • 1:1
  • RTV 8352
  • Low Viscosity
  • Encapsulation

Product Description

Addition-curing 2K silicone in a 1:1 ratio for potting and encapsulation in electronics and electrical engineering.

BLUESIL RTV 8352 LV A&B is a two-component silicone elastomer that cures at room temperature via a polyaddition reaction; curing can be accelerated by heat. It is supplied as a viscous liquid and, after mixing A and B and curing, becomes a solid, elastic material. The 1:1 mixing ratio is insensitive to dosing errors and is suitable for machine processing. Typical applications include coating and encapsulation in electrical and electronic engineering.

1:1 potting compound for electronics

Mixing ratio 1:1 by weight, pot life approx. 130 minutes (23 °C, 50 % relative humidity), demolding after approx. 8 hours. Curing can be accelerated by heat, at 120 °C in approx. 1 hour. Optional additives: Accelerator BLUESIL ACC PA 39 and Retarder BLUESIL RTRD PA 40.

RTV 8352 LV in figures
1:1
Mixing ratio A:B (by weight)
55
Shore A (approx.)
130 min
Pot life at 23 °C, 50 % relative humidity.
8 h
Demolding time at 23 °C, 50 % r.h.

What sets RTV 8352 LV apart

1:1 mixing ratio
Favorable 1:1 mixing ratio by weight, insensitive to inaccurate dosing, and suitable for 2K machines.
Low viscosity
Viscosity of the components approx. 2,200 mPa·s at 23 °C, easily pourable and refillable.
Heat curing possible
Cures at room temperature in about 8 hours, can be accelerated by heat, at 120 °C in about 1 hour.
Dielectric properties
Dielectric constant 3.6 (IEC 60250), volume resistivity 1.4 x 10^15 Ohm-cm (IEC 60093).
Heat dissipation
Designed for heat dissipation during potting.

What is RTV 8352 LV used for?

Electronics potting
Encapsulation and potting in electronic applications.
Electrical engineering
Coating and encapsulation in electrical engineering applications.
Machine processing
Suitable for use in 2K dispensing and mixing machines thanks to the 1:1 ratio.
Data sheet and safety data sheet
View or download the Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
To the documents →

Processing

1
Mixing
Stir both components thoroughly before use.
2
Mixing
Ratio 100:100 by weight (1:1), by hand or with a slow-running stirrer to avoid air entrainment.
3
Degas
Degas under vacuum of 30 to 50 mbar for about 10 minutes, releasing the vacuum twice during this time.
4
Pouring and curing
Clean and degrease the substrate, slowly pour the mixture at the lowest point; curing takes about 8 hours at 23 °C, can be accelerated by heat.

Important Notes

  • Risk of inhibition due to sulfur-vulcanized natural or synthetic rubbers, RTV catalyzed with metal salts, PVC stabilized with tin salts, and epoxies catalyzed with amines. When in doubt, perform a preliminary test and use the degassing system only for this RTV type.
  • Store in original containers between -10 °C and 30 °C for up to 6 months from the date of manufacture.
  • The currently valid Elkem data sheet (TDS and SDS) is authoritative, which we will be happy to send you.

Frequently Asked Questions about RTV 8352 LV

Practical application and design questions, answered by SILITECH.

1:1 by weight (100:100), insensitive to dosing variations.

Yes, by heat; at 120 °C the product cures in about 1 hour instead of about 8 hours at room temperature.

For coating and encapsulation in electrical and electronic engineering.

Yes, the accelerator BLUESIL ACC PA 39 and the retarder BLUESIL RTRD PA 40.