Silicones, silicone oils, sprays
Casting and potting resins)
)
LOCTITE SF 7455 Spray (150 ml)
Cyanoacrylate activator as a spray for accelerating the curing of LOCTITE instant adhesives.
Cyanoacrylate activator spray for accelerating the curing of LOCTITE instant adhesives — universally on metal, plastic, glass, and ceramic; steel is fixed with LOCTITE 416 in just 10 seconds
Internal Reference:
49-7455.SP.ML150
LOCTITE SF 7455 Spray (150 ml) is a cyanoacrylate activator spray for accelerating the curing of LOCTITE instant adhesives — universally on metal, plastic, glass, and ceramic; steel is fixed with LOCTITE 416 in just 10 seconds.
Cyanoacrylate activator sprays for accelerating the curing of instant adhesives — rapid fixing in seconds, universal material compatibility, residue-free evaporation. LOCTITE SF 7455 is tailored to specific industrial and workshop applications — the key properties and areas of use are detailed below.
LOCTITE SF 7455 is a cyanoacrylate activator in spray form, specifically developed to accelerate the curing of LOCTITE instant adhesives. Fixes steel with LOCTITE 416 in just 10 seconds. Universal material compatibility for metals, plastics, glass, and ceramics. Colorless to slightly amber, very low viscosity, can be applied by spray, drop, or brush. Evaporates residue-free.
What sets LOCTITE SF 7455 apart
What is LOCTITE SF 7455 used for?
Processing
Recommended accessories
Technical data for LOCTITE SF 7455 Spray (150 ml)
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 150 ml |
| Suitable for | Cyanoacrylates (Super Glue) |
| Drying time | approx. 60 seconds |
| Surface activity | Up to 5 minutes |
| Application method | Subsequent application, pre-coating |
| Physical Properties | |
|---|---|
| Color | colorless |
| Density | 0.68 g/cm³ |
| Viscosity at 25°C | 0.4 mPa·s |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.
Frequently Asked Questions about LOCTITE SF 7455
Application and compatibility questions from practice — answered by SILITECH.
LOCTITE SF 7455 Spray (150 ml): Cyanoacrylate activator as a spray for accelerating the curing of LOCTITE instant adhesives — universally on metal, plastic, glass, and ceramic; fixes steel with LOCTITE 416 in just 10 seconds. Main applications: electronics assembly, tamper-evident bonding, assembly aid.
CA activators significantly accelerate the curing of instant adhesives (cyanoacrylates) — typically from minutes to seconds. Two application modes: Pre-treatment: Spray activator onto one bonding surface, allow to flash off completely, then apply adhesive — particularly effective at low humidity. Post-treatment: Apply adhesive, join parts, then spray activator onto the adhesive overflow for immediate fixation. Steel bonded with LOCTITE 416 sets in just 10 seconds. Activator remains effective for up to 5 minutes after application.
No. Silicone sprays leave a water-repellent silicone film that prevents the adhesion of paints, adhesives, and coatings. Do not apply to surfaces that will later be painted or overlaid, or clean thoroughly beforehand with SILISIL Silicone Remover.
Store aerosol can below +50 °C, protect from direct sunlight, keep away from ignition sources. Pressure container — do not forcibly open or incinerate, even after use. In unopened original packaging, shelf life according to SDS — observe the printed expiry date.
Pre-treatment: Spray activator onto the bonding surface, allow to flash off completely (~30 sec), then apply CA adhesive and join — use within 5 minutes. Post-treatment: Apply adhesive, join, then spray activator onto the adhesive overflow — immediate curing. With LOCTITE 416 + SF 7455: Steel bonding fixed in 10 seconds. Universal material compatibility — metal, plastic, glass, ceramic. Not suitable for applications with pure oxygen or strongly oxidizing media.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 150 ml |
| Suitable for | Cyanoacrylates (Super Glue) |
| Drying time | approx. 60 seconds |
| Surface activity | Up to 5 minutes |
| Application method | Subsequent application, pre-coating |
| Physical Properties | |
|---|---|
| Color | colorless |
| Density | 0.68 g/cm³ |
| Viscosity at 25°C | 0.4 mPa·s |
| Keywords | |
|---|---|
| Keywords | |