Skip to content

SilbioneRTV-2 silicones

SILBIONE RTV 4420 A + B

Medium-hard to soft 2K Pt silicone (Shore A 20) with high elongation (650%) — the firmer variant of the Silbione RTV-44 series for liners, pads and prostheses subjected to higher loads

Temperature range
-50 to 150 °C
Hardness
20 Shore A
Viscosity
4,000 mPa·s
Viscosity A
4,000 mPa·s

  • Brand
  • Color cured - Transparent
  • Food contact
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Density (g/cm³)
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Tensile strength (MPa)
  • Elongation at break (%)
  • Tensile strength (N/mm)
  • Curing type
  • Electrical Insulation
  • Container
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
  • Packaging
Your selection SILBIONE RTV 4420 A + B
General terms and conditions of business

HS Code: 39100000

SILBIONE RTV 4420 A + B sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Mechanical properties

Shore hardness A
20 Shore A
Tensile Strength
5 MPa
Elongation at break
650 %
Tear resistance
15 kN/m
Linear shrinkage
< 0.1 %

Processing

Viscosity of Mixture
4,000 mPa·s
Viscosity Component A
4,000 mPa·s
Viscosity Component B
4,000 mPa·s
Pot life at 23 °C
50 min

Physical and thermal

Density (23 °C)
1.07 g/cm³
Temperature resistance (duration)
-50 to 150 °C
Peak temperature (briefly)
150 °C

Storage

Shelf life in original packaging
12 months
Storage Temperature
-5 to 30 °C

Product Information

Brand
Silbione
Manufacturer
Elkem Silicones
Mixing Ratio
1 : 1
Curing type
Addition (Platinum)
Container
200ml + 200ml, 1kg + 1kg, 5kg + 5kg
Number of components
2K (two-component)
Consistency
Flowable
Mixing Ratio
1:1

Further Properties

UV resistance
No

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Density (g/cm³)
1.07
Uncrosslinked viscosity (mPa·s)
4000

Electrical Properties

Electrical Insulation
No

Product Approvals

Food contact
Yes
Medical grade
Yes

Mechanical properties

Tensile strength (MPa)
5
Elongation at break (%)
650
Tensile strength (N/mm)
15
Keywords
  • Silicone
  • USP CLASS VI
  • 2K Silicone
  • SILBIONE
  • ELKEM
  • Swiss warehouse
  • biocompatible
  • FDA
  • RTV
  • Addition
  • Platinum
  • Complete kit
  • medium hardness
  • hohe Dehnung
  • 1:1
  • Medical-Grade
  • ISO 10993
  • sterilizable
  • Shore A 20
  • prosthesis liner
  • Heel cushion
  • Toe separator
  • RTV 4420
  • A+B
  • 650%

Product Description

Two-component, platinum-curing silicone elastomer that cures at room temperature via a polyaddition reaction and whose curing can be accelerated by heat. Very high elongation, low viscosity, sterilizable according to TDS; hardness according to TDS approx. Shore A 20.

SILBIONE RTV 4420 A&B is supplied as two low-viscosity, liquid components and mixed in a 1:1 weight ratio. After curing, it forms an elastic, resistant material; polymerization occurs without heat generation and can be accelerated by heat, e.g., 60 minutes at 80°C according to the Elkem data sheet. Compared to SILBIONE RTV 4411, the viscosity is lower (approx. 4000 mPa·s) and the hardness higher (approx. Shore A 20). According to the Elkem data sheet, it is positioned for heel cushions, toe separators, and liners for limb prostheses.

Regulatory notice

According to the Elkem data sheet, extensive toxicological tests on SILBIONE products have demonstrated sufficient biocompatibility and suitability for the recommended applications; SILBIONE RTV 4420 A and B meet regulatory requirements in several countries and comply with a range of medical and pharmaceutical regulations, according to the Elkem data sheet. We can assist you with selection and approval for medical or skin contact applications.

SILBIONE RTV 4420 in figures
20
Hardness Shore A (DIN 53505, approx.)
650 %
Elongation at break (DIN 53504, approx.)
4'000 mPa·s
Viscosity at 23°C (approx.)
50 min
Pot life at 23°C (approx.)

What makes the SILBIONE RTV 4420 stand out

Shore A hardness approx. 20
According to the Elkem data sheet, the cured elastomer reaches approximately Shore A 20 (DIN 53505).
Very high elasticity
Elongation at break according to TDS approx. 650 % (DIN 53504), tensile strength approx. 5.0 N/mm² (DIN 53504).
Low viscosity
Both components are low-viscosity, with a viscosity of approximately 4000 mPa·s at 23°C. According to TDS, they mix quickly and are easy to process.
Mixing ratio 1:1
Component A (contains Pt) and B (contains SiH) in a weight ratio of 1:1, pot life approx. 50 min at 23°C.
Sterilizable
According to the Elkem data sheet, the material is sterilizable.
Tear resistance
Tear strength according to TDS approx. 15 N/mm (DIN 53515), density approx. 1.07 g/cm³ at 23°C, color translucent.

What is SILBIONE RTV 4420 used for?

Heel cushions
Positioned according to the Elkem data sheet for heel cushions.
Toe separators
Positioned according to the Elkem data sheet for toe separators.
Liners for limb prostheses
Positioned according to the Elkem data sheet for liners of limb prostheses. For medical or skin contact applications, we support you in selection and approval.
Data sheet and safety data sheet
View or download the Technical Data Sheet (TDS) and Safety Data Sheet (SDS).
To the documents →

Processing

1
Mixing
Stir both components thoroughly before use. Mix A and B 1:1 by weight, either by hand or with a slow-running mixer to avoid air entrainment and temperature increase.
2
Degas
Degas the mixture preferably at 30 to 50 mbar. The volume expands to 3 to 4 times its original size; after complete degassing, release the vacuum.
3
Casting
Pour after degassing by gravity or under slight pressure.
4
Curing
Polymerization occurs at 23°C, slows down at lower temperatures, and is accelerated by heat; according to TDS, for example, 60 minutes at 80°C. Avoid contact with inhibitors.

Important Notes

  • Crosslinking can be inhibited by contact with certain substances: sulfur-crosslinked natural rubber, RTV-2 silicones catalyzed with metal salts (e.g., tin compounds), PVC stabilized with tin salts, and amine-catalyzed epoxy resins. If in doubt, test the substrate on a small area beforehand.
  • The currently valid Elkem data sheet (TDS and SDS) is authoritative, which we will be happy to send you.

Frequently asked questions about SILBIONE RTV 4420

Practical application and design questions, answered by SILITECH.

According to the Elkem data sheet, A:B 1:1 by weight, pot life approx. 50 min at 23°C.

Polymerization occurs at 23°C, which can be accelerated by heat, according to TDS e.g. 60 minutes at 80°C.

According to TDS, 4420 has a lower viscosity (approx. 4000 mPa·s) and a higher hardness (approx. Shore A 20) than 4411; the elongation at break is lower at approx. 650%.

According to TDS, in original packaging, storage time is up to 12 months from the date of manufacture (components A and B) at -5°C to 30°C.