Internal reference:
40-750.KN.K005
HS code:
3910.0000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Curing type
- Non-reactive
- Container
- 5 kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 750 cSt
- Density (g/cm³)
- 0.971 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- >300 °C
- Pour point (°C)
- -50 °C
Product Description
SILISIL Silicone Oil 750 cSt is a special viscosity between 500 and 1000 cSt for defined industrial applications.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
750 cSt is the intermediate viscosity for applications that lie between 500 and 1000 cSt — higher lubricating film stability than 500 cSt, but still sprayable and suitable for coating.
What distinguishes SILISIL Silicone Oil 750 cSt
What is SILISIL Silicone Oil 750 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 750 cSt in direct comparison with related viscosities in our product range.
750 cSt Current Product |
500 cSt → | 1000 cSt → | 3000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 750 | 500 | 1'000 | 3'000 |
| Main application | Specialized lubrication | Industrial lubrication heavy load | Demanding Industrial Lubrication | Specialized lubrication |
Frequently asked questions about SILISIL Silicone Oil 750 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 750 cSt: Special viscosity between 500 and 1000 cSt for defined industrial applications. Main applications include specialty lubrication, premium release agent, and hydraulic damping.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 750 cSt is optimal for: specialty lubrication and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.