Skip to content

BluesilRTV-2 silicones

B

Low-viscosity Bluesil thinner for adjusting the viscosity of Bluesil RTV systems — without loss of the mechanical end properties of the crosslinked silicone

Density
0.87 g/cm³
Cured Color
Transparent
Self-leveling
Yes
Mixing Ratio
One-component

This product is no longer available.


HS Code: 38140000

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Physical and thermal

Density (23 °C)
0.87 g/cm³
Flash point
40 °C

Storage

Shelf life in original packaging
24 months
Storage Temperature
5 to 30 °C

Product Information

Brand
Bluesil
Manufacturer
Elkem Silicones
Curing type
Non-reactive
Container
1 kg, 5 kg
Number of components
1K (one-component)
Consistency
Flowable
Mixing Ratio
One-component

Further Properties

UV resistance
No

Physical Properties

Cured Color
Transparent
Self-leveling
Yes

Electrical Properties

Electrical Insulation
No

Product Approvals

Food contact
No
Medical grade
No
Keywords
  • Silicone
  • BLUESIL
  • Thinner
  • ELKEM
  • Swiss warehouse
  • Diluant
  • solvent
  • Diluant 2030
  • flammable

Product Description

Bluesil Diluant 2030 is a low-viscosity Bluesil thinner used to adjust the viscosity of Bluesil RTV systems — without loss of the mechanical end properties of the cured silicone.

Bluesil thinner — low-viscosity silicone oils for adjusting the viscosity of Bluesil RTV systems without loss of mechanical end properties. Diluant 2030 is tailored to specific applications — the most important properties and areas of use are listed below.

Viscosity adjustment without loss of mechanical properties

Bluesil Diluant 2030 is a low-viscosity silicone thinner used to adjust the mixed viscosity of Bluesil RTV systems — enabling casting into complex geometries without compromising the final mechanical properties of the cured silicone.

Diluant 2030 at a glance
Viscous.
Adjustment
Bluesil
compatible
Low viscosity
Thinner
Swiss
Warehouse

What sets Diluant 2030 apart

Viscosity adjustment
Reduces the mix viscosity of Bluesil RTV systems.
Preserve mechanical properties
No impact on the mechanical properties of the cured silicone.
Complex geometries
Enables pouring into fine, complex molds.
Bluesil standard
Proven Bluesil thinner.
SILITECH consultation
Dosing via SILITECH consultation.

What is Diluant 2030 used for?

Bluesil RTV dilution
Adjustment of RTV mix viscosities.
Complex mold geometries
Better flow in fine geometries.
Pad printing optimization
With Bluesil RTV 3132 for pad hardness adjustment.
Industrial application
Workflow optimization in Bluesil processing.
Data Sheets & Safety Data Sheet
TDS and SDS in multiple languages — view or download directly.
To the documents →

Processing

1
Prepare RTV A
Stir component A thoroughly before adding the thinner.
2
Stir in the thinner
5–10 % thinner to the RTV-A component — higher dosages (up to 40 %) possible, but affect final hardness.
3
Add catalyst
Standard mixing ratio (10:1) with catalyst B or CATA — as usual.
4
Mix + degas
30–50 mbar vacuum for bubble-free mixing.
5
Casting
Diluted mixture flows more easily into complex geometries — an advantage for fine molds.

Recommended accessories


Diluant 2030 in comparison

Direct comparison with related thinner products from our range. "— " = not specified in the data sheet.

Diluant 2030
Current Product
Fluid 47 V 50 →Fluid 47 V 300 →Inhibitor 3 →
FunctionViscosity adjustment——Pot life extension
ViscosityLow Viscosity50 mm²/s300 mm²/s—
Dosagesee TDS——see TDS (very low)
Compatible systemsBluesil RTV series——Bluesil RTV Polyaddition

Frequently Asked Questions about Diluant 2030

Practical application and design questions — answered by SILITECH.

Bluesil Diluant 2030: Low-viscosity Bluesil thinner for adjusting the viscosity of Bluesil RTV systems — without loss of the mechanical end properties of the cured silicone. Main applications: Bluesil RTV dilution, complex mold geometries, pad printing optimization.

Thinners are used to adjust the mixture viscosity — when the RTV mixture is too viscous for the geometry. Typically 5–10 % thinner based on RTV. Higher dosages (up to 40 %) are possible, but they affect the final hardness. Important: stir the thinner into Part A before adding the catalyst.

Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.

In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).