Skip to content

BluesilRTV-2 silicones

BLUESIL ESA 6110 A

Optically clear 2K-Pt silicone gel for the protective encapsulation of highly sensitive electronics — sensors, solar cells, vibration damping — with QC variant (5 min pot life)

Temperature range
-50 to 200 °C
Viscosity
1’200 mPa·s
Viscosity A
1’000 mPa·s
Pot life
50 min

  • Brand
  • Color cured - Transparent
  • Food contact
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Uncrosslinked viscosity (mPa·s)
  • Mixing Ratio
  • Pot life (min)
  • Curing type
  • Electrical Insulation
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
  • Container
Your selection BLUESIL ESA 6110 A 40-6110A
General terms and conditions of business

Internal reference: 40-6110A
HS code: 39100000

BLUESIL ESA 6110 A sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Processing

Viscosity of Mixture
1’200 mPa·s
Viscosity Component A
1’000 mPa·s
Viscosity Component B
1’200 mPa·s
Pot life at 23 °C
50 min

Physical and thermal

Density (23 °C)
0.98 g/cm³
Temperature resistance (duration)
-50 to 200 °C
Peak temperature (briefly)
200 °C

Electrical characteristics

Dielectric strength
23 kV/mm
Volume resistivity
10¹⁵ Ω·cm
Dielectric constant ε (1 kHz)
2.8
Dissipation factor tan δ
0.001

Storage

Shelf life in original packaging
12 months
Storage Temperature
-10 to 30 °C

Product Information

Brand
Bluesil
Manufacturer
Elkem Silicones
Mixing Ratio
1 : 1
Curing type
Addition (Platinum)
Number of components
2K (two-component)
Consistency
Flowable
Mixing Ratio
1:1
Container
500 g, 1 kg, 5 kg

Further Properties

UV resistance
Yes

Physical Properties

Cured Color
Transparent
Self-leveling
Yes
Uncrosslinked viscosity (mPa·s)
1

Electrical Properties

Electrical Insulation
Yes

Curing values

Pot life (min)
50

Product Approvals

Food contact
No
Medical grade
No
Keywords
  • Silicone
  • ESA
  • BLUESIL
  • 2K Silicone
  • ELKEM
  • Swiss warehouse
  • Addition
  • Platinum
  • Base component
  • 1:1
  • Silicone gel
  • Electronics Encapsulation
  • Optically Clear

Product Description

Bluesil ESA 6110 A & B is an optically clear 2K-Pt silicone gel for the protective encapsulation of highly sensitive electronics — sensors, solar cells, vibration damping — with QC variant (5 min pot life).

This product line comprises 2K polyaddition silicone gels for the protective encapsulation of highly sensitive electronics — very soft, optically clear, with excellent dielectric properties. ESA 6110 is tailored to specific industrial applications — the most important properties and areas of application are listed below.

Optically clear silicone gel

Bluesil ESA 6110 is a very soft, optically clear 2-component silicone gel — protecting sensitive electronics from mechanical stress and temperature fluctuations. It is a 1:1 mix with excellent dielectric properties and includes a QC variant (5-minute pot life) for machine application.

ESA 6110 in numbers
Optically clear
Gel
1:1
Mixing ratio
5 / 50 min
Pot life (QC/Standard)
23 kV/mm
Breakdown

What distinguishes ESA 6110

Optically clear
Direct view of encapsulated components — visual inspection possible.
Very soft gel
Penetration 250 — optimal protection against mechanical stress.
Excellent dielectric properties
23 kV/mm breakdown, 1×10¹⁵ Ω·cm volume resistivity.
1:1 mixing ratio
Easy dosing + machine-friendly.
QC variant (5 min pot time)
Fast option for high-throughput machine processing.
Inherent stickiness
Pronounced inherent tack — good adhesion to potted components.

What is ESA 6110 used for?

Electronics Encapsulation (Potting)
Protection of sensitive electronic components.
Automotive sensors
Encapsulation of automotive sensors and power electronics.
Solar cell encapsulation
Protection of photovoltaic cells from weather and stress.
Damping systems
Vibration and shock damping of sensitive components.
High-frequency electronics
Encapsulation with defined dielectric properties.
Power electronics
Protection of highly stressed power components.
Data Sheets & Safety Data Sheet
Complete TDS and SDS in DE, EN, FR — view or download directly.
To the documents →

Processing

1
Place component
Position the sensor/PCB cleanly in gel form.
2
Mix 1:1
Standard version (50 min pot life) for hand mixing, QC version (5 min) for machines.
3
Degas
30–50 mbar vacuum.
4
Casting
Slowly takes shape — flows well thanks to low viscosity.
5
Curing
120–180 min RT, can be accelerated with heat — Penetration 250 results in a very soft gel.

Recommended accessories


Important Notes

Mixing & Dosing
Stir A and B thoroughly before each processing. Accurate dosing in the specified ratio (see table above) — preferably weight-based. Incorrect dosing leads to incomplete crosslinking.
Degassing
Degas the mixture under vacuum at 30–50 mbar. Material expands 3–4 times, falls back after 5–10 min. Interrupt vacuum several times for better degassing.
Avoid inhibitors
Polyaddition silicones are inhibited by: sulfur-vulcanized rubber, tin-catalyzed RTV, amine epoxides, PVC with tin salts. When in doubt, perform a preliminary test.
Application consulting
SILITECH advises you on the optimal RTV variant for your application — substrate, hardness, pot life, mechanics. Contact us with your specific application case.

ESA 6110 compared to related RTV products

Crosslinking system, mechanics, and processing times directly side by side — all values from the official Elkem-TDS. “— " = not specified in the data sheet.

ESA 6110
Current Product
ESA 7250 →RTV 141 →RTV 147 →
Crosslinking system2K Polyaddition (Pt) Gel2K Polyaddition (Pt)2K Polyaddition (Pt)2K Polyaddition (Pt)
Mixing ratio1 : 110 : 110 : 110 : 1
ColorOptically clearOptically clear, colorlessTransparent, colorlessBeige / light blue (B)
Shore A hardnessGel (penetration 250)A 52A 50A 60
Elongation at break—115 %120 %180 %
Tensile Strength—6.2 MPa6 MPa6 MPa
Tear strength—4 kN/m—>15 kN/m
Pot life50 min (Std) / 5 min (QC)4 h4 h2 h
Demolding time120–180 min24–48 h24–48 h24–48 h
Mixed viscosity1'200 mPa·s4'000 mPa·s4'000 mPa·s150,000 mPa·s
Main applicationElectronics Encapsulation (Potting)Electronics pottingOptoelectronic connectionsThermal insulation devices

Frequently asked questions about ESA 6110

Practical processing and design questions — answered by SILITECH.

Bluesil ESA 6110 A & B: Optically clear 2K platinum silicone gel for the protective encapsulation of highly sensitive electronics — sensors, solar cells, vibration damping — with a QC variant (5 min pot life). Main applications are electronics encapsulation (potting), automotive sensors, and solar cell encapsulation.

Polyaddition crosslinking is a 2-component silicone chemistry with a platinum catalyst. Component A contains the platinum complex, component B the SiH crosslinker. When mixed, the components crosslink without releasing reaction by-products — no shrinkage due to outgassing substances, excellent dimensional accuracy, low linear shrinkage. Important: Polyaddition silicones are inhibited by various substances — sulfur-vulcanized natural rubbers, tin-catalyzed RTV silicones, amine-catalyzed epoxy resins, PVC stabilized with tin salts. In case of doubt, a preliminary test must be carried out.

Thoroughly stir components A and B before each processing step. Dose precisely according to the mixing ratio specified in the TDS (see comparison table above) — preferably by weight. Mix with an electric or pneumatic stirrer at low speed (minimize air entrainment). Degas the mixture under vacuum (30–50 mbar) — the material expands to 3–4 times its volume, bubbles escape, and the material settles back after 5–10 minutes. Then pour slowly into the mold from the lowest point to avoid air entrapment. For polyaddition systems, avoid contact with inhibitors (sulfur rubber, tin RTV, amine epoxides, PVC with tin salts).

Store in unopened original container in a dry, cool place — typically between +5 and +30 °C, exact values see TDS. Store components A and B separately; after opening, seal airtight. Polyaddition systems are insensitive to moisture, but should be stored cool to preserve pot life. Consult the Safety Data Sheet (SDS) before use.

In the comparison table above, you will find related RTV products with different hardnesses, pot lives, or application profiles. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (substrate, desired hardness, processing time, requirements for mechanical properties and resistance).