Skip to content

BluesilRTV-2 silicones

BLUESIL V-695 A+B Black (2.74 kg Kit)

Special 2K-Pt silicone (black, flowable) as an abrasive air seal material for the compressor blades of jet engines (aerospace special choice)

Temperature range
-40 to 200 °C
Density
1.2 g/cm³
Cured Color
Black
Self-leveling
No

  • Brand
  • Paint hardened - Black
  • Food contact
  • Shore hardness A (cured)
  • Manufacturer
  • Self-leveling
  • Medical grade
  • Mixing Ratio
  • Pot life (min)
  • Demolding time (min)
  • Curing type
  • Electrical Insulation
  • Number of components
  • Consistency
  • UV resistance
  • Mixing Ratio
Your selection BLUESIL V-695 A+B Black (2.74 kg Kit) 40-695.KT.K2.74
General terms and conditions of business

Internal reference: 40-695.KT.K2.74
HS code: 34039900

BLUESIL V-695 A+B Black (2.74 kg kit) sample offer

Technical Data

Typical values, not a specification. The technical data sheet (TDS) is binding.

Physical and thermal

Density (23 °C)
1.2 g/cm³
Temperature resistance (duration)
-40 to 200 °C
Peak temperature (briefly)
200 °C

Storage

Shelf life in original packaging
36 months
Storage Temperature
2 to 40 °C

Product Information

Brand
Bluesil
Manufacturer
Elkem Silicones
Mixing Ratio
100:5
Curing type
Addition (Platinum)
Number of components
1K (one-component)
Consistency
Thixotropic
Mixing Ratio
One-component

Further Properties

UV resistance
Yes

Physical Properties

Cured Color
Black
Self-leveling
No

Electrical Properties

Electrical Insulation
Yes

Curing values

Pot life (min)
40
Demolding time (min)
240

Product Approvals

Food contact
No
Medical grade
No

Mechanical properties

Shore hardness A (cured)
A 40
Keywords
  • Black
  • Silicone
  • BLUESIL
  • ELKEM
  • Swiss warehouse
  • Silicone grease
  • Lubricating Grease
  • V-695
  • 2K Paste
  • Heat-Curing

Product Description

Bluesil V-695 A & B is a special 2K-Pt silicone (black, flowable) as an abradable air seal material for the compressor blades of jet engines (aerospace special choice).

This product line comprises aerospace-qualified specialty 2K silicone elastomers for demanding aerospace applications — e.g., abradable air seals in jet engines. V-695 is tailored to specific industrial applications — the key properties and areas of application are listed below.

Abradable Air Seal for Jet Engines

Bluesil V-695 is a highly specialized potting compound for the aerospace industry—an abrasive air seal material used between compressor blades and the casing of jet engines. It features high thermal stability, good machinability, a long working time, and low density.

V-695 in numbers
Aerospace
Jet Engines
Black
Color
Pt-Cure
Polyaddition
Special
2.74 kg Kit

What distinguishes the V-695

Aerospace-specific
Specifically qualified for the aviation industry.
Abradable Air-Seal
Defined abrasion behavior between compressor blades and housing.
High thermal stability
Optimized for the heat stress in the jet engine.
Good workability
Can be mechanically reworked after crosslinking.
Long processing time
Careful potting even for large aerospace tools.
Low density
Optimized for weight-critical aerospace applications.

What is the V-695 used for?

Jet engine compressor air seals
Main application — abradable air seal for compressor blades.
Aviation special potting
Aerospace-qualified material for demanding applications.
High-temperature aerospace
Special potting compound used in aviation maintenance.
Gas turbines
Abradable Seals in Gas Turbine Plants.
Engine maintenance
Repair and service in the aerospace industry.
Special applications via SILITECH
Advice on SILITECH regarding application and processing.
Data Sheets & Safety Data Sheet
Complete TDS and SDS in DE, EN, FR — view or download directly.
To the documents →

Processing

1
Prepare aerospace tools
Clean special tools according to aerospace specifications.
2
Mix A & B
Dose according to weight-based aerospace workflow.
3
Degas
Vacuum degassing according to specification.
4
Pour into tool
The long processing time allows for careful pouring.
5
heat curing
Curing according to Aerospace Cure Schedule — typically elevated temperature.

Recommended accessories


Important Notes

Mixing & Dosing
Stir A and B thoroughly before each processing. Accurate dosing in the specified ratio (see table above) — preferably weight-based. Incorrect dosing leads to incomplete crosslinking.
Degassing
Degas the mixture under vacuum at 30–50 mbar. Material expands 3–4 times, falls back after 5–10 min. Interrupt vacuum several times for better degassing.
Avoid inhibitors
Polyaddition silicones are inhibited by: sulfur-vulcanized rubber, tin-catalyzed RTV, amine epoxides, PVC with tin salts. When in doubt, perform a preliminary test.
Application consulting
SILITECH advises you on the optimal RTV variant for your application — substrate, hardness, pot life, mechanics. Contact us with your specific application case.

V-695 compared to related RTV products

Crosslinking system, mechanics, and processing times directly side by side — all values from the official Elkem-TDS. “— " = not specified in the data sheet.

V-695
Current Product
ESA 7252 →ESA 7250 →RTV 8352 LV →
Crosslinking system2K Polyaddition (Pt)2K Polyaddition (Pt)2K Polyaddition (Pt)2K Polyaddition (Pt)
Mixing ratiosee TDS1 : 110 : 11 : 1
ColorBlackBlack (A) / white (B)Optically clear, colorlessWhitish
Shore A hardnesssee TDSA 48A 52A 55
Elongation at break—170 %115 %78 %
Tensile Strength—2.3 MPa6.2 MPa2.3 MPa
Tear strength——4 kN/m—
Pot lifelong1.5 h4 h130 min
Demolding timewith heat treatment8 h (RT) / 5 min @ 150 °C24–48 h8 h
Mixed viscosityflowable3,000–3,500 mPa·s4'000 mPa·s2'200 mPa·s
Main applicationJet engine compressor air sealsAerospace fire protectionElectronics pottingElectrical Engineering Encapsulation

Frequently Asked Questions about V-695

Practical processing and design questions — answered by SILITECH.

Bluesil V-695 A & B: Special 2K platinum silicone (black, flowable) as an abrasive air seal material for compressor blades of jet engines (aerospace specialty choice). Main applications include jet engine compressor air seals, specialty aerospace potting, and high-temperature aerospace.

Polyaddition crosslinking is a 2-component silicone chemistry with a platinum catalyst. Component A contains the platinum complex, component B the SiH crosslinker. When mixed, the components crosslink without releasing reaction by-products — no shrinkage due to outgassing substances, excellent dimensional accuracy, low linear shrinkage. Important: Polyaddition silicones are inhibited by various substances — sulfur-vulcanized natural rubbers, tin-catalyzed RTV silicones, amine-catalyzed epoxy resins, PVC stabilized with tin salts. In case of doubt, a preliminary test must be carried out.

Thoroughly stir components A and B before each processing step. Dose precisely according to the mixing ratio specified in the TDS (see comparison table above) — preferably by weight. Mix with an electric or pneumatic stirrer at low speed (minimize air entrainment). Degas the mixture under vacuum (30–50 mbar) — the material expands to 3–4 times its volume, bubbles escape, and the material settles back after 5–10 minutes. Then pour slowly into the mold from the lowest point to avoid air entrapment. For polyaddition systems, avoid contact with inhibitors (sulfur rubber, tin RTV, amine epoxides, PVC with tin salts).

Store in unopened original container in a dry, cool place — typically between +5 and +30 °C, exact values see TDS. Store components A and B separately; after opening, seal airtight. Polyaddition systems are insensitive to moisture, but should be stored cool to preserve pot life. Consult the Safety Data Sheet (SDS) before use.

In the comparison table above, you will find related RTV products with different hardnesses, pot lives, or application profiles. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (substrate, desired hardness, processing time, requirements for mechanical properties and resistance).