Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Curing type
- Non-reactive
- Viscosity (silicone oils)
- Medium viscosity silicone oils: 10 cSt (almost water-thin) to 100,000 cSt (viscous)
- Container
- 100g, 200g, 500g, 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, 950kg
- Temperature resistance
- Medium (up to 200°C)
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 1000 cSt
- Density (g/cm³)
- 0.971 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- >300 °C
- Pour point (°C)
- -50 °C
Product Description
SILISIL Silicone Oil 1000 cSt is an established industrial lubricant and release agent viscosity for higher loads.
SILISIL Silicone Oils are high-purity linear polydimethylsiloxane (PDMS) liquids with a purity of 100%. Their viscosity of 1,000 cSt defines their range of applications — from lubrication and release agents to hydraulic functions and specialized care and industrial applications.
1'000 cSt is one of the most widely used high-viscosity PDMS grades — the standard choice for demanding lubrications, premium release agents and damper fillings.
What distinguishes SILISIL Silicone Oil 1000 cSt
What is SILISIL Silicone Oil 1000 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 1000 cSt in direct comparison with related viscosities in our product range.
1,000 cSt Current Product |
500 cSt → | 750 cSt → | 3000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 1'000 | 500 | 750 | 3'000 |
| Main application | Demanding Industrial Lubrication | Industrial lubrication heavy load | Specialized lubrication | Specialized lubrication |
Frequently asked questions about SILISIL Silicone Oil 1000 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 1000 cSt: Established industrial lubricant and release agent viscosity for higher loads. Main applications include demanding industrial lubrication, premium release agent, and hydraulic damping.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
Store in the unopened original container at room temperature (ideally below 60 °C). Avoid eye contact. SILISIL Silicone Oils are generally non-toxic, odorless, and tasteless — nevertheless, consult the Safety Data Sheet (SDS), which is available in the "Documents" tab.
The viscosity determines the application. 1,000 cSt is optimal for: demanding industrial lubrication and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.