HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 25 kg, 200 kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 100 cSt
- Density (g/cm³)
- 0.966 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- 305 °C
- Pour point (°C)
- -55 °C
Product Description
SILISIL Silicone Oil 100 cSt is a standard lubricant and release agent base — the most widely used PDMS viscosity in the industry.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
100 cSt is the most widely used silicone oil viscosity in industry — the standard choice for injection molding release agents, pneumatic lubrication, and maintenance product bases. It offers the ideal balance of spreadability, service life, and lubrication.
What distinguishes SILISIL Silicone Oil 100 cSt
What is SILISIL Silicone Oil 100 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 100 cSt in direct comparison with related viscosities in our product range.
100 cSt Current Product |
50 cSt → | 200 cSt → | 1000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 100 | 50 | 200 | 1'000 |
| Main application | Injection molding release agent | Pneumatics & Compressed Air Lubrication | Lubrication in mechanical engineering | Demanding Industrial Lubrication |
Frequently asked questions about SILISIL Silicone Oil 100 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 100 cSt: Standard lubricant and release agent base — the most widely used PDMS viscosity in industry. Main applications include injection molding release agents, pneumatic lubrication, and furniture and floor care.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 100 cSt is optimal for: injection molding release agents and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.