HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 100g, 1kg, 5kg, 25kg, 200kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 200 cSt
- Density (g/cm³)
- 0.968 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- >300 °C
- Pour point (°C)
- -50 °C
Product Description
SILISIL Silicone Oil 200 cSt is a medium viscosity PDMS for more demanding lubrication and hydraulic applications.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
200 cSt offers a significantly more stable lubricating film layer than 100 cSt — suitable for higher loads, long-running industrial applications and oil-filled dampers.
What distinguishes SILISIL Silicone Oil 200 cSt
What is SILISIL Silicone Oil 200 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 200 cSt in direct comparison with related viscosities in our product range.
200 cSt Current Product |
100 cSt → | 300 cSt → | 1000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 200 | 100 | 300 | 1'000 |
| Main application | Lubrication in mechanical engineering | Injection molding release agent | Industrial Lubrication | Demanding Industrial Lubrication |
Frequently asked questions about SILISIL Silicone Oil 200 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 200 cSt: Medium viscosity PDMS for demanding lubrication and hydraulic applications. Main applications include lubrication of mechanical engineering, hydraulic drives, and damping fluid.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 200 cSt is optimal for lubrication in mechanical engineering and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.