HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 1kg, 5kg, 20kg, 25kg, 190kg, 950kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 3 cSt
- Density (g/cm³)
- 0.898 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- 85 °C
- Pour point (°C)
- -80 °C
Product Description
SILISIL Silicone Oil 3 cSt is a low-viscosity PDMS for cosmetics, lubrication, and electrical insulation.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
3 cSt combines low viscosity with good lubricity — ideal for applications requiring spreading and lubrication simultaneously, e.g., elastomer-on-metal lubrication in accelerometers and micromechanics.
What distinguishes SILISIL Silicone Oil 3 cSt
What is SILISIL Silicone Oil 3 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 3 cSt in direct comparison with related viscosities in our product range.
Frequently asked questions about SILISIL Silicone Oil 3 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 3 cSt: Low-viscosity PDMS for cosmetics, lubrication, and electrical insulation. Main applications include cosmetics and personal care, micromechanical lubrication, and dielectric impregnation.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 3 cSt is optimal for cosmetics & personal care and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.