HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 1kg, 5kg, 20kg, 25kg, 180kg, 200kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 2 cSt
- Density (g/cm³)
- 0.873 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- 65 °C
- Pour point (°C)
- -60 °C
Product Description
SILISIL Silicone Oil 2 cSt is a very low viscosity PDMS — volatile, water-repellent, ideal as a solvent and in cosmetic formulations.
When selecting a silicone fluid, the specific quality, its viscosity, and the intended operating conditions are considered together. The technical data sheet and safety data sheet are part of the relevant product quality information.
2 cSt-PDMS evaporates quickly, leaving an extremely thin, water-repellent layer — the standard choice for quick-dry release agents and cosmetics with a silky feel.
What distinguishes SILISIL Silicone Oil 2 cSt
What is SILISIL Silicone Oil 2 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 2 cSt in direct comparison with related viscosities in our product range.
2 cSt Current Product |
0.65 cSt → | 3 cSt → | 5 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 2 | 0,65 | 3 | 5 |
| Main application | Dry lubrication with self-evaporation | Cosmetics & Antiperspirants | Cosmetics & Personal Care | Baking paper & corrugated paper |
Frequently asked questions about SILISIL Silicone Oil 2 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 2 cSt: Very low viscosity PDMS — volatile, water-repellent, ideal as a solvent and in cosmetic formulations. Main applications are dry lubrication with self-evaporation, cosmetics & skincare, and quick-dry release agent.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
For storage and handling, refer to the safety data sheet for the specific product grade. Keep containers closed and observe the protective measures specified therein.
The viscosity determines the application. 2 cSt is optimal for: dry lubrication with self-evaporation and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.