Knowledge Center | SILITECH

The right chemistry. Since 2000. +41 (0)31 398 50 70 info@silitech.ch

4 items

potting × World: Mold Making & Molding ×

Addition-curing silicone does not harden: Identify inhibitors

Addition-curing silicone fails to harden: Identifying inhibitors. If an addition-curing (platinum-catalyzed) silicone remains sticky or liquid, inhibition is almost always the culprit: Certain ...

Brand: SILISIL Type: FAQ World: Mold Making & Molding World: Silicones World: Processing & Dispensing Technology

16.06.2026

0 28

Release agents for mold making: wax, PVA, silicone, PTFE compared

A good release agent is crucial for success or failure in mold making. Too much – and you lose surface details. Too little – and the casting sticks to the mold. This guide compares...

Industry: Art, Model & Mold Making Type: Comparison World: Mold Making & Molding

07.04.2026

0 1744

Silicone for mold making: The complete guide. Material selection, processing, and error prevention

Are you planning your first mold-making project with silicone – or looking for a better solution for your series production? This guide explains how to choose the right silicone, avoid mistakes...

Industry: Art, Model & Mold Making Type: Guide World: Mold Making & Molding

07.04.2026

0 1550

RTV-2 silicones in architectural model making | SILITECH

When every tenth of a millimeter counts. Midnight in the studio. Scale 1:200. Deadline at 8:00 AM. The facade lives from 0.5 mm ribs and precise shadow gaps. Plaster cracks. Epoxy warps. Time is running out...

Industry: Art, Model & Mold Making Brand: Elkem Brand: SILISIL Type: Application World: Mold Making & Molding

04.09.2025

0 1376

What you will find here

On the SILITECH blog, we share in-depth expertise, technical background information, and practical examples to help you optimally utilize our products and sustainably improve your processes. Benefit from our know-how gained from over 25 years of industry experience.

Archive

Keywords

Industry: Construction & Building Industry: E-Mobility & Batteries Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Industry: Art, Model & Mold Making Industry: Mechanical Engineering & Industry Industry: Medical Technology Property: Biocompatible Property: Chemical Resistant Property: Electrically Insulating Property: Electrically Conductive Property: High Strength Property: Temperature Resistant Transparent : UV & Weather Resistant Property: Thermally Conductive Brand: Elkem Brand: Henkel/Loctite Brand: Merbenit Brand: Molydal Brand: Permabond Brand: SILIRESIN Brand: SILISIL Type: Application Type: FAQ Type: Guide Type: Fact Sheet Type: Comparison World: Mold Making & Molding World: Bonding & Sealing World : Surface Treatment & Corrosion Protection World: Lubrication & Separation World : Silicones World: Processing & Dispensing Technology World: Potting & Electronic Protection