Skip to content

Bluesil, CAF and Silbione: Select silicones according to the task

Classifying Bluesil, CAF, Silbione and Silcolapse: Selecting silicones specifically for mold making, sealing, electronics and other applications.

3-minute read

Material motif: silicones

The silicone product range includes brand names, product families, and individual formulations. To make the right choice, it helps to first define the task: Should the material form a shape, seal a joint, protect a component, lubricate it, or reduce foaming during processing?

Manufacturers and brands: As of 2026

Elkem completed the sale of the majority of its silicone division to Bluestar on April 30, 2026. The silicone division now operates under the name Bluestar Silicones. The product brands will continue to serve as a guide; however, for specific ordering and processing, the full type name, component, and current product documentation are crucial.

brand or seriesorientationTo clarify the selection
BLUESILSilicone products for numerous industrial applicationsMaterial form, crosslinking type and precise quality
CAFOne-component RTV silicones for industrial bonding and sealingSubstrate, joint geometry, curing and bonding requirements
SILBIONESilicones for healthcare applicationsPrecise quality, contact conditions and biological test documentation
SILCOLAPSEDefoamers for various industrial processesProcess medium, dosage, temperature and application-specific requirements

Mold making: from casting to silicone quality

The selection process begins with the casting material, the geometry, and the required dimensional accuracy. Undercuts demand a different combination of hardness, elongation, and tear resistance than a simple, open mold. Shore hardness alone does not fully describe demoldability.

In an RTV-2 system, the base and hardener are a single unit. The manufacturer-approved hardener combination, dosage, and temperature determine the process. The designations A and B, on their own, do not indicate the mixing ratio or the role of any component. For repeated castings, the service life is tested with the actual casting material.

Bonding and sealing with one-component silicones

For a sealing joint, the bonding surfaces, movement, and cross-section must be defined. Subsequently, it is checked whether the material cures sufficiently under the intended conditions. Skin formation, handling strength, and curing are distinct states.

For electronic assemblies, corrosion resistance, contact properties, and electrical requirements are key selection criteria. Suitability for an industrial seal cannot automatically be extrapolated to sensitive printed circuit boards. Primers are selected based solely on the silicone quality and the substrate.

Silicone oils, pastes and greases

These different forms fulfill different tasks. A liquid oil, for example, can dampen movement; a paste is often intended to remain in a contact point. When selecting a lubricant, viscosity or consistency, the contact material, and the function of the lubricating or intermediate layer are important factors. Even within a single product line, the appropriate viscosity grade must be chosen.

A thermally conductive paste is assessed after the contact joint has been assembled. The electrical function of the connection must be considered separately. For elastomers, swelling and mechanical changes must be tested with the specific compound.

Electronic protection

For potting, factors such as flow behavior, processing time, curing, and the mechanical stress on the components are considered. If heat dissipation is required, thermal conductivity and the geometry of the heat path are also taken into account. Electrical dielectric strength, moisture behavior, and adhesion are separate selection criteria.

The specifications for a two-component system must clearly indicate whether they describe the base, the hardener, the mixture, or the cured material. A single-component viscosity must not be used as the mixture viscosity in dosing planning.

Body contact and regulated applications

For Silbione and other silicones intended for body contact, precise quality is crucial. The manufacturer's instructions must be appropriate for the contact location, duration of contact, and processing. Biological material testing is a component of the evaluation of the finished medical device. Additives, cleaning, and sterilization are also part of this evaluation.

Even with defoamers for food processing, the specific application, dosage, and relevant manufacturer declarations are checked. A product family with some suitable grades does not mean that every product in the family is approved for every food contact.

This is how a preliminary selection becomes a reliable decision

  1. Describe material function, contact materials and load.
  2. Record the full product name and required components.
  3. Assign technical data sheets, safety data sheets and required declarations of the same quality.
  4. Test processing on a small scale with documented dosage and temperature.
  5. Inspect the finished part under the specified conditions and release the process.

Manufacturer sources

The current product documentation is decisive for processing.