Permabond Engineering Adhesives.
Technical adhesives for industrial assembly: cyanoacrylates, anaerobic adhesives, epoxy structural adhesives, UV-curing systems, and MS polymers. SILITECH provides support with selection, data sheets, and procurement from our Gümligen warehouse.
About the brand
About Permabond
For over 50 years, Permabond has been developing and producing technical adhesives for industrial assembly: cyanoacrylates, anaerobic adhesives and sealants, epoxy and acrylic structural adhesives, UV-curing systems, and MS polymers. These products are used in various sectors, including electronics, medical technology, mechanical engineering, and automotive engineering—wherever bonds require defined strength, temperature resistance, and process reliability. SILITECH carries Permabond products, assists with selection using technical data sheets, tests alternatives upon request, and delivers from its Gümligen warehouse, including TDS and SDS upon request.
range
Permabond range
Six adhesive technologies at a glance. The selection depends on substrates, gap size, strength, temperature and processing time; we provide support in comparing the results with the data sheet.
Cyanoacrylate (superglue)
Fast-setting bonding of small components at room temperature. Selection based on viscosity, gap size, and substrate; primers and activators are available for difficult-to-bond plastics.
To the product rangeAnaerobic adhesives
Hardening under anaerobic conditions in contact with metal: threadlockers, surface seals, shaft-hub connections, and pipe threads. Selection based on strength class and ease of disassembly.
To the product rangeStructural adhesives (epoxy)
Two-component or thermosetting one-component epoxies for structural bonding of metals and composites. Selection based on pot life, mixing ratio, and temperature requirements.
To the product rangeUV adhesives
Curing in seconds under UV light: for glass, transparent plastics, electronics, and optics. Wavelength, layer thickness, and lamp technology determine the process; we advise on the appropriate curing technique.
To the product rangeStructural adhesives (acrylic)
Structural acrylic adhesives for high-strength bonds between metals and plastics, even under impact and peel stress. Suitability should be tested on the original substrate.
To the product rangeElastic adhesives (MS polymer)
Elastic bonding and sealing under vibration, component expansion, and temperature fluctuations. Good adhesion to many substrates; suitability and paintability must be tested on a product-specific basis.
To the product rangeOur Permabond products.
FAQ
Frequently Asked Questions
Are the products available from stock?
Standard Permabond products are generally available for immediate delivery from our Gümligen warehouse; we procure other types upon request. We will confirm availability and delivery time upon inquiry.
Will I receive advice on product selection?
Yes. Describe the substrates, gap dimensions, load, and process. We will check suitable Permabond types based on the technical data sheets and suggest alternatives if necessary.
Are there technical data sheets and safety data sheets (SDS)?
Yes. We provide technical data sheets (TDS) and safety data sheets (SDS) upon request. We will clarify further documentation, such as conformity documents, with the manufacturer if necessary.
Are customer-specific packaging or formulations possible?
We check the feasibility of different container sizes depending on the product and order quantity. We clarify customer-specific requirements directly with the manufacturer and provide information on feasibility, minimum order quantities, and delivery times.
contact
Questions about Permabond adhesives?
Describe the application, substrates, and load. We will check suitable products, data sheets, alternatives, and availability.