)
)
CAF 7037 MF
Coating, protecting and assembling: continuous coating of conveyor belts, insulation of electric motors, sealing of iron soles, sealing of air filters, screen printing of seals.
Low-viscosity, neutral-curing 1K silicone sealant (oxime, MEKO-free, brick red) for coating and separation applications
Documents
HS code:
39100000
CAF 7037 MF: One-component thixotropic silicone elastomer, fluid, brick red, neutral-curing without MEKO, high release effect.
CAF 7037 MF belongs to the Elkem CAF series of one-component, moisture-curing silicones. Technology: Neutral curing (1K). Sales segment: Aerospace (distribution segment, no certification).
One-component thixotropic silicone elastomer, fluid, brick red, neutral-curing without MEKO, high release effect.
What distinguishes the CAF 7037 MF
What is the CAF 7037 MF used for?
processing
Important instructions
- The relevant information is the current Elkem data sheet (TDS and SDS), which we will gladly send you.
- Cross-linked by humidity; reseal opened containers tightly.
CAF 7037 MF in comparison
Technical data for CAF 7037 MF
| Product information | |
|---|---|
| brand | CAF |
| Manufacturer | Elkem Silicones |
| Networking type | Single-component (humidity) |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Container | 100 g, 25 kg |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | Red |
| Self-leveling | Yes |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about CAF 7037 MF
Practical application and design questions — answered by SILITECH.
CAF 7037 MF is suitable for continuous coating of conveyor belts, insulation of electric motors, sealing of iron bases and air filters.
CAF 7037 MF: Neutral crosslinking (1K).
Continuous use according to Elkem data sheet -60 to 225 degrees C.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 100 g or 25 kg |
| brand | CAF |
| Manufacturer | Elkem Silicones |
| Networking type | Single-component (humidity) |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | Red |
| Self-leveling | Yes |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Keywords | |
|---|---|
| Keywords | |
| Mechanical properties | |
|---|---|
| Shore hardness A | 24.0 Shore A |
| Modulus at 100% elongation | 0.5 MPa |
| Tensile strength | 2.1 MPa |
| Elongation at break | 400.0 % |
| Tear resistance | 5.0 kN/m |
| processing | |
|---|---|
| Viscosity of mixture | 50,000 mPa·s |
| Skin formation time | 27.0 min |
| Fully cured after 24 hours | 4.0 mm |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 1.1 g/cm³ |
| Temperature resistance (duration) | -60 to 225 °C |
| Peak temperature (short-term) | 250 °C |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 3.0 |
| Dielectric strength | 19.0 kV/mm |
| Contact resistance | 2e+15 Ω·cm |
| Loss factor tan δ | 0.005 |
| storage | |
|---|---|
| Shelf life in original packaging | 12 months |
| Storage temperature | 2 to 30 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: