CAF 30 White
Industrial 1K silicone sealant with high elongation at break for railway and heating appliance sealing.
Industrial 1K silicone sealant (acetic, white) with high elongation at break for railway and heating appliance seals
Documents
Internal reference:
40-307.ML310
HS code:
391000000
CAF 30: One-component acetate-curing silicone elastomer, non-sagging, adhesive; White/Black/Translucent (standard), Red/Grey/Blue on request.
CAF 30 belongs to the Elkem CAF series of one-component, moisture-curing silicones. Technology: Acetate (acetic acid curing, 1K). Sales segment: All industries.
One-component acetate-curing silicone elastomer, non-sagging, adhesive; White/Black/Translucent (standard), Red/Grey/Blue on request.
What makes CAF 30 stand out
What is CAF 30 White used for?
processing
Important instructions
- The relevant information is the current Elkem data sheet (TDS and SDS), which we will gladly send you.
- Cross-linked by humidity; reseal opened containers tightly.
CAF 30 in comparison
Technical data for CAF 30 White
| Product information | |
|---|---|
| brand | CAF |
| Manufacturer | Elkem Silicones |
| Networking type | Single-component (humidity) |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Container | 310 ml |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about CAF 30
Practical application and design questions — answered by SILITECH.
CAF 30 is suitable for bonding and sealing in industry, side windows of trains, sealing on heat sources (ovens, heat exchangers, steam circuits, boilers).
CAF 30: Acetate (acetic acid crosslinking, 1K).
According to the Elkem data sheet, it can be used continuously from -60 to 250 degrees C.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| brand | CAF |
| Manufacturer | Elkem Silicones |
| Networking type | Single-component (humidity) |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Container | 310 ml |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Keywords | |
|---|---|
| Keywords | |
| Mechanical properties | |
|---|---|
| Shore hardness A | 20.0 Shore A |
| Modulus at 100% elongation | 0.6 MPa |
| Tensile strength | 2.2 MPa |
| Elongation at break | 500.0 % |
| Tear resistance | 5.0 kN/m |
| processing | |
|---|---|
| Skin formation time | 6.0 min |
| Fully cured after 24 hours | 4.2 mm |
| Crosslinking 2 mm layer | 6.0 h |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 1.05 g/cm³ |
| Temperature resistance (duration) | -60 to 250 °C |
| Peak temperature (short-term) | 250 °C |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 3.0 |
| Dielectric strength | 20.0 kV/mm |
| Contact resistance | 2e+15 Ω·cm |
| Loss factor tan δ | 0.003 |
| storage | |
|---|---|
| Shelf life in original packaging | 24 months |
| Storage temperature | 2 to 30 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: