)
SILISIL Adhesive Dispensing Gun 50ml (1:1 / 2:1)
DMA 51-00-01 System A-50
SILISIL Dispensing Gun 50 ml — for twin cartridges 1:1 and 2:1.
Precise dispensing of 2K adhesives and silicones from 50 ml standard cartridges. From CH warehouse.
Internal Reference:
49-810.ML050
SILISIL Dosing Gun 50 ml — for 2K double cartridges (1:1 and 2:1)
SILISIL Dispensing Gun 50 ml is a robust manual dispensing gun for 2K double cartridges in 50 ml format, designed for the two common mixing ratios 1:1 and 2:1. The gun is used together with static mixing nozzles and delivers a uniform, bubble-free application of 2K silicones, adhesives, and potting compounds.
Compatible with all standard 50 ml double cartridges from the SILISIL series as well as many other manufacturers (Permabond, Scotch-Weld, Sika, etc., provided they use the same cartridge format).
Product Advantages
- Robust metal construction — for daily workshop and laboratory use
- Universally applicable for 1:1 and 2:1 mixing ratios
- Ergonomic handle with consistent dispensing force
- One-hand operation possible
- Easy to clean, low maintenance
Typical Applications
- 2K Silicone Adhesives: Assembly and potting in workshop and laboratory
- Epoxy and polyurethane adhesives: Small series, model construction, prototype production
- Sealing applications: Precise bead dispensing from double cartridges
- Dental Laboratory / Medical Technology: Controlled dosing in small volumes
Usage
- Screw the appropriate static mixing nozzle onto the cartridge
- Insert the cartridge into the gun and secure it with the lever
- Before working, dispense a few centimeters of lead to homogenize both components in the mixer
- Dispose of the used mixing nozzle after use; the same mixing nozzle must not be reused
Storage and Care
- Store dry and clean
- Mechanically remove cured adhesive or silicone residues
- Occasionally lubricate moving parts lightly
The gun is supplied without cartridge and without mixing tubes. The appropriate 50 ml double cartridges (1:1 or 2:1) as well as the static mixing tubes are available separately in the SILITECH Shop.
Technical data for SILISIL Adhesive Dispensing Gun 50ml (1:1 / 2:1)
| Product Information | |
|---|---|
| Container | 50 ml |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.
Frequently asked questions about the SILISIL 50 ml dispensing gun
Answers on application, compatibility, and care.
The SILISIL 50 ml dispensing gun is designed for standard 50 ml double cartridges with mixing ratios of 1:1 and 2:1. Not compatible with 400 ml or 310 ml cartridges, nor with other formats (e.g., 50 ml 10:1).
No. Once static mixing nozzles have been used, they already contain mixed adhesive and will cure after a short time. Use a fresh mixing nozzle for each new operation.
All 2K adhesives and 2K silicones supplied in 50 ml double cartridges with a 1:1 or 2:1 mixing ratio — SILISIL silicones as well as common industrial adhesives from other manufacturers.
Only minimal maintenance: occasionally clean thoroughly and lightly grease the moving parts. With daily use, the gun will last for many years.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Container | 50 ml |
| Keywords | |
|---|---|
| Keywords | |