 (50 ml))
 (50 ml))
LOCTITE AA 307 - UV-curing adhesive for plastics and glass (50ml)
Ideal for visually demanding, gap-filling bonding applications in industry and trade.
LOCTITE AA 307 - UV-curing adhesive for plastics and glass (50ml) is an epoxy adhesive from the Loctite brand. Available sizes: 50 ml, 250 ml.
Documents
HS Code:
35061000
LOCTITE AA 307 – UV-curing adhesive for plastics and glass
LOCTITE AA 307 is a fast-curing, UV-curing adhesive for transparent plastics and glass – ideal for optically demanding, gap-filling bonding applications in industry and trade.
Detailed Product Description
LOCTITE AA 307 is a one-component, solvent-free, acrylate-based adhesive specifically designed for bonding transparent plastics such as polycarbonate (PC), polyethylene terephthalate (PET), SAN, and glass. It cures extremely quickly under UV light (320–390 nm), resulting in highly transparent, visually appealing bond lines. Its medium viscosity allows for both thin-gap and slightly gap-filling applications – ideal for components with manufacturing tolerances.
LOCTITE AA 307 is characterized by its very high initial strength, good impact resistance, and resistance to moisture and temperature fluctuations. The adhesive is ideally suited for applications requiring fast production times and the highest optical quality, such as display manufacturing, the assembly of advertising elements, model making, or the furniture industry.
Product properties
- Chemical base: Acrylate
- Curing: UV light (320–390 nm), no dual curing
- Color: colorless, transparent
- Viscosity (Brookfield, 25°C): approx. 500–700 mPa·s
- Density: approx. 1.1 g/cm³
- Handling strength: in a few seconds (typically: 4–10 seconds with a suitable light source)
- Final strength: after a few minutes
- Gap bridging: optimal down to 0.5 mm
- Temperature resistance: -40 °C to +80 °C
- Tensile shear strength (PC/PC): typ. 10 N/mm²
- Tensile shear strength (PET/PET): typ. 10 N/mm²
- Impact resistance: high
- Storage: 2–8 °C, protect from light
Suitable materials
- Polycarbonate (PC)
- PET
- SAN
- Glass
- (not suitable for metals or materials that do not allow UV light to pass through)
Typical application areas
- Bonding of displays and transparent plastic parts
- Advertising elements, acrylic glass constructions
- Display cases, plexiglass covers
- Model making and industrial assembly
- Applications in furniture making, shop design, lamp making
- General glass and plastic bonding
Processing instructions
- Preparation: Thoroughly clean surfaces, keep dry and dust-free.
- Instructions: Apply a thin layer of adhesive to one of the surfaces to be bonded.
- Joining: Align and join the parts.
- Curing: Exposure to UV light (wavelength 320–390 nm), typically 4–10 seconds until hand-tight.
- Note: Thick, colored, or UV-impermeable materials will prevent or slow down the curing process.
Note: LOCTITE AA 307 is specifically designed for transparent plastics and glass. For optimal results, the components should be UV-transparent and have a maximum coating thickness of 0.5 mm. Not suitable for metals or opaque materials.
Technical data for LOCTITE AA 307 - UV-curing adhesive for plastics and glass (50ml)
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 50 ml, 250 ml |
| UFI (Unique Formula Identifier) | J783-H0CR-7000-KV15 |
| Product type | UV-curing acrylic adhesive |
| Temperature range (°C) | -40 °C to +80 °C |
| Suitable for | PC, PET, SAN, glass |
| Chemical resistance | Good |
| Physical Properties | |
|---|---|
| Color | transparent |
| Viscosity at 25°C | 500–700 mPa·s |
| Curing technology | UV light (320–390 nm) |
| Hand strength | 4–10 seconds |
| Tensile shear strength PC/PC | 10 N/mm² |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | up to 0.5 mm |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 50 ml or 250 ml |
| Brand | Loctite |
| UFI (Unique Formula Identifier) | J783-H0CR-7000-KV15 |
| Product type | UV-curing acrylic adhesive |
| Temperature range (°C) | -40 °C to +80 °C |
| Suitable for | PC, PET, SAN, glass |
| Chemical resistance | Good |
| Physical Properties | |
|---|---|
| Color | transparent |
| Viscosity at 25°C | 500–700 mPa·s |
| Curing technology | UV light (320–390 nm) |
| Hand strength | 4–10 seconds |
| Tensile shear strength PC/PC | 10 N/mm² |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | up to 0.5 mm |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: