)
)
LOCTITE AA F246 + LOCTITE SF INI5 – "No-Mix" 2K Acrylic Structural Adhesive Set (50 ml)
High-strength, impact-resistant 2K acrylate adhesive system – ideal for fast, reliable structural bonding.
LOCTITE AA F246 + LOCTITE SF INI5 – “No-Mix” 2-component acrylate structural adhesive set (50 ml) is a structural adhesive from the Loctite brand. Available in 50 ml containers.
Internal reference:
49-506.PG.ML050
HS code:
35061000000
Product Description
The LOCTITE AA F246 + LOCTITE SF INI5 set combines the high-performance, toughened structural adhesive LOCTITE AA F246 with the matching activator LOCTITE SF INI5.
The "no-mix" system enables simple, clean processing: The activator is applied to one surface, the adhesive to the other. Curing only begins when the components are joined. This eliminates the need for manual mixing of the components, saving time and ensuring consistently high processing quality.
LOCTITE AA F246 cures quickly at room temperature, is impact-modified, and offers excellent temperature and chemical resistance. Its high viscosity makes it suitable for vertical applications and uneven joints.
Product properties
- Technology: Modified Methyl Methacrylate Ester (MMA)
- Colour (F246, unhardened): Light yellow to brown
- Viscosity (F246): 17–35 Pa·s at 25 °C
- System: Two-component ("No-Mix") – activator and adhesive separate
- Activator: LOCTITE® SF INI5 (amber)
- Fixing time: ≤ 5 minutes (with INI5, for steel/PVC)
- Shear strength (after 168 h @ 22 °C, INI5):
- Steel, blasted: 33 N/mm²
- Stainless steel: 16 N/mm²
- Aluminium: 19 N/mm²
- ABS: 6.1 N/mm²
- PVC: 11 N/mm²
- Polycarbonate: 4.6 N/mm²
- PMMA: 5.1 N/mm²
- Temperature resistance: up to 150 °C (short-term)
- Chemical resistance: Resistant to motor oil, ATF, salt solutions, moisture, diluted acids and alkalis
Suitable materials
- Steel and stainless steel
- Aluminum
- ABS
- PVC
- Polycarbonate*
- PMMA (acrylic glass)*
* Check compatibility beforehand.
Typical application areas
- High-strength structural bonding in metal and plastics construction
- Equipment and apparatus construction
- Vehicle and transport technology
- Repairs and retrofits
- Bonds with high requirements for impact and peel strength
- Applications with different material pairings
Processing instructions
- Keep bonding surfaces clean, dry, and free of grease.
- Apply activator (INI5) thinly to one adhesive surface, adhesive (F246) to the other.
- For larger gaps (up to 0.5 mm), apply activator to both surfaces.
- Add parts within 15 minutes (with single-sided activation).
- Remove excess adhesive with an organic solvent before it hardens.
- Hold the connection in place until the adhesive has set (typically a few minutes).
- Final strength is reached after 24–72 hours, depending on the gap, material and temperature.
Technical data for LOCTITE AA F246 + LOCTITE SF INI5 – “No-Mix” 2K acrylate structural adhesive set (50 ml)
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 50 ml |
| Technology | Modified Methyl Methacrylate Ester (MMA) |
| Temperature resistance | up to 150 °C (briefly) |
| Chemical resistance | Resistant to motor oil, ATF, salt solutions, moisture, diluted acids and alkalis |
| Physical Properties | |
|---|---|
| Color | light yellow |
| Curing values | |
|---|---|
| Fixture time | ≤ 5 minutes (with INI5, for steel/PVC) |
| General | |
|---|---|
| Shear strength (after 168 h @ 22 °C, INI5) | Steel, blasted: 33 N/mm² Stainless steel: 16 N/mm² Aluminum: 19 N/mm² ABS: 6.1 N/mm² PVC: 11 N/mm² Polycarbonate: 4.6 N/mm² PMMA: 5.1 N/mm² |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 50 ml |
| Technology | Modified Methyl Methacrylate Ester (MMA) |
| Temperature resistance | up to 150 °C (briefly) |
| Chemical resistance | Resistant to motor oil, ATF, salt solutions, moisture, diluted acids and alkalis |
| Physical Properties | |
|---|---|
| Color | light yellow |
| Curing values | |
|---|---|
| Fixture time | ≤ 5 minutes (with INI5, for steel/PVC) |
| Uncategorized | |
|---|---|
| Shear strength (after 168 h @ 22 °C, INI5) | Steel, blasted: 33 N/mm² Stainless steel: 16 N/mm² Aluminum: 19 N/mm² ABS: 6.1 N/mm² PVC: 11 N/mm² Polycarbonate: 4.6 N/mm² PMMA: 5.1 N/mm² |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: