)
)
Loctite EA 110 – High-performance metal adhesive for extreme conditions
Loctite EA 110 is a one-component, metal-filled epoxy adhesive specifically designed for applications with high mechanical stress. Thanks to its excellent resistance to shear, splitting, and tensile forces, this adhesive is particularly suitable for industrial applications where conventional fastening methods reach their limits.
With its silver color and paste-like consistency, EA 110 can be applied precisely and exhibits controlled flow during curing. The adhesive bonds reliably to a wide variety of materials – even slightly oily steel surfaces – and offers exceptional durability and chemical resistance. The bond withstands temperatures from -40 °C to +180 °C continuously and can even withstand higher temperatures for short periods without significant impairment of the adhesive strength.
Loctite EA 110 is particularly suitable for replacing conventional mechanical fastening methods. This not only improves the appearance but also increases design freedom. In many cases, the adhesive bond is even stronger than the material being bonded itself – a clear indication of the high performance of this product.
Product properties
- Color: Silver
- Viscosity: 400,000 mPa·s
- Density: 1.5 g/cm³
- Gap bridging: up to 4 mm
- Temperature resistance: -40 °C to +180 °C
- Shear strength (steel): approx. 30 MPa
- Coefficient of thermal expansion: 45 x 10⁻⁶ mm/mm/°C
- Curing time: e.g. 20 min. at 180 °C (depending on component size and heating method)
Suitable materials
- Steel (even slightly oily)
- Aluminium and non-ferrous metals
- Ferrites
- SMC (Sheet Moulding Compound)
- Other metallic or mineral surfaces
Typical application areas
- Design and assembly in metal processing
- Alternative to welded, riveted or screwed connections
- Electrical and motor manufacturing
- Vehicle and mechanical engineering
- Applications involving direct contact with drinking water (according to approval)
Processing instructions
- Preparation: Clean and degrease the surface. For optimal adhesion, light roughening or blasting is recommended.
- Application: Apply adhesive to one side (not both), spread evenly and avoid air bubbles.
- Joining: Press the components together so that the adhesive is completely distributed.
- Fixing: Secure with light pressure and cure thermally.
- Curing time: e.g. 60 min at 120 °C, depending on the heating system (oven, induction, infrared, etc.).
Technical data for LOCTITE EA 110 (320 ml)
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 320 ml |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Brand | Loctite |
| Container | 320 ml |
| Keywords | |
|---|---|
| Keywords | |