Skip to content
Website 0 CHF
  1. All Products
  2. Silicone Sprays
  3. ACHEM SG-1001S CFC-free silicone release spray
ACHEM SG-1001S CFC-free silicone release spray

ACHEM SG-1001S CFC-free silicone release spray

https://www.silitech.ch/web/image/product.template/1583/image_1920?unique=8ac25b8

Universal silicone-based mold release spray for plastics processing.

Universal silicone-based mold release spray for plastics processing — highly adhesive with high release reserve for multiple demoldings, CFC-free, ideal for polyurethane and epoxy resin applications

Price on request

This combination does not exist.

Contact us
Mold release agent, CFC-free silicone spray , silicone release spray, mold release spray, price list missing

 
General Terms and Conditions

Shipping usually within 1 to 3 business days
(Availability confirmed after order)

Express logistics. Fast and reliable within Switzerland & Europe

From Swiss stock Dispatch within 24h Batch certificate Invoice 30 days (B2B) Technical advice
Shipping & Delivery

Usually 1 to 3 business days

Availability is confirmed after order receipt.

Express logistics within Switzerland & Europe.

Terms and Conditions →

Product data

Internal reference: 41-858.SP.ML500

HS Code: 39100000

Internal reference: 41-858.SP.ML500
HS code: 39100000

ACHEM SG-1001S CFC-free silicone release spray
ACHEM SG-1001S CFC-free silicone release spray
ACHEM · SKU 41-858.SP.ML500

ACHEM SG-1001S CFC-free silicone release spray is a universal silicone-based mold release spray for plastics processing — very adhesive with high release reserve for multiple demoldings, CFC-free, ideal for polyurethane and epoxy resin applications.

Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for the clean demolding of polyester, epoxy, and polyurethane resins in model making, boat building, automotive body construction, and industrial applications. SG-1001S is tailored to specific industrial and workshop applications — the most important properties and areas of application can be found below.

High release reserve for multiple demoldings

ACHEM SG-1001S is a universal silicone-based mold release spray for plastics processing — highly adhesive with good sliding properties and high release reserve, allowing for easy multiple demolding. CFC-free. Suitable for difficult demolding in polyurethane and epoxy resin processing.

SG-1001S in numbers
Silicone
Active ingredient
CFC-free
Propellant
Multiple
Separation reserve
PU/EP
resin-compatible

What makes the SG-1001S stand out

Highly adhesive release layer
High release reserve even for demanding multiple demolding processes.
Universal application in plastics processing
Suitable for all separation problems in injection molding, pressing and reaction casting.
Difficult demolding
Especially suitable for polyurethane and epoxy resin processing with high requirements.
CFC-free
Environmentally friendly propellant formulation — meets standards for modern industry.
Good sliding properties
Reduces friction during demolding — protects the mold and component.
Simple spray application
Aerosol can for even, thin application by hand.

What is the SG-1001S used for?

Polyurethane injection molding
PU foam, PU reaction casting and PU elastomers with high separation requirements.
Epoxy resin processing
Separating cured epoxy resin components from molds.
Injection molded thermoplastics
Standard and engineering thermoplastics in mass production.
Reaction casting applications
Complex reaction-cast components with undercuts.
Multiple demoldings
High separation reserve allows for multiple cycles without re-spraying.
Industrial toolmaking
Complex geometries and delicate structures — fine spray mist.
Data Sheets & Safety Data Sheet
TDS and SDS in multiple languages — view or download directly.
To the documents →

Processing

1
Prepare the mold
Mold clean, grease-free, and silicone-free. Seal absorbent substrates beforehand. For new molds, repeated waxing is recommended — micropores are closed.
2
Condition the release agent
Bring the aerosol can to room temperature (approx. 20 °C) before use — spraying when cold results in uneven layers.
3
Shake the aerosol can
Stir thoroughly before and during use — active ingredients must be evenly distributed in the propellant gas.
4
Spray from a distance of 20–30 cm
Apply slowly and evenly in a thin layer — all mold areas must be wetted by the release agent.
5
Flash-off 10–60 minutes
Drying time varies by product — solvents must evaporate completely. For wax-based release sprays, optionally polish with a soft cotton cloth (caution — friction generates heat; do not polish away the release film).
6
Re-spray as needed
If the release effect diminishes, repeat the process. The release agent film builds up in the mold after repeated use — periodic cleaning with a release agent remover is necessary.

Recommended accessories

Release spray TRS
Silicone-free spray release agent up to +120 °C for epoxy, polyester, and polyurethane resins.
To the product →
Wax Release Spray G&P
Quick-drying silicone-free wax release spray for polyester, epoxy, PMA, PU, and silicone rubber.
To the product →
Neukadur Wax Release Spray P6
External wax release agent for UP and EP resins — standard in composite model making.
To the product →
SILISIL white petroleum jelly release paste
Universal release agent for PU/epoxy/polyester casts — protects the mold from aggressive resins.
To the product →

SG-1001S in comparison

Direct comparison with the related SILISIL sprays — the right choice for your application.

SG-1001S
Current Product		 Release Spray TRS →Wax Release Spray G&P →NSR Food FPS →
Active ingredient baseSiliconeWachsWachsWet film fluid
Silicone statussilicone-containingsilicone-freesilicone-freesilicone-free
Thermal Stabilitysee TDS+120 °C+90 °C+200 °C
Suitable resinsPU, Epoxy, ThermoplasticsEpoxy, Polyester, PUUP, epoxy, PMMA, PU, silicone rubberPLA, PC, PE, PP
Main applicationUniversal Release SprayComposite release sprayUniversal Wax Release SprayFood packaging
Topics & Application Fields
Key terms related to this product. Also useful for our search and filters.
Mold release agent, CFC-free silicone spray , silicone release spray, mold release spray, price list missing

No technical data stored as attributes.

No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.

Frequently asked questions about SG-1001S

Application and compatibility questions from practice — answered by SILITECH.

ACHEM SG-1001S CFC-free silicone release spray: Universal silicone-based mold release spray for plastics processing — highly adhesive with high release reserve for multiple demolding cycles, CFC-free, ideal for polyurethane and epoxy resin applications. Main applications: polyurethane injection molding, epoxy resin processing, injection molding of thermoplastics.

For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, Wax Release Spray G&P, Release Spray TRS) — silicone-free, they leave the component paintable/glueable. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release reserve. For each application: thin, even coat, allow to flash off — often repeated waxing before the first pour on new molds.

No. Silicone sprays leave a water-repellent silicone film that prevents the adhesion of paints, adhesives, and coatings. Do not apply to surfaces that will later be painted or overlaid, or clean thoroughly beforehand with SILISIL Silicone Remover.

Store aerosol can below +50 °C, protect from direct sunlight, keep away from ignition sources. Pressure container — do not forcibly open or incinerate, even after use. In unopened original packaging, shelf life according to SDS — observe the printed expiry date.

Polyester/Epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane challenges: ACHEM SG-1001S with highest release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration No. 155325. If uncertain about material compatibility, always perform a small test pour.

Your question not covered?

Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.

Submit inquiry Request sample