)
CRC SPRAY FREEZE 75 (200 g)
Fast-acting cooling spray for detecting thermal problems on electronic components.
Fast-acting cooling spray for detecting thermal problems on electronic components — immediate, targeted cooling deep below zero, helpful for troubleshooting and maintenance
Internal reference:
40-2311.SP.ML200
HS code:
29035100
CRC SPRAY FREEZE 75 (200 g) is a fast-acting cooling spray for the detection of thermal problems on electronic components — immediate, localized cooling deep below zero, helpful in troubleshooting and maintenance.
Aerosol cooling sprays for detecting thermal problems on electronic components — instant, targeted cooling deep below zero degrees Celsius for identifying loose connections and cold solder joints. CRC Spray Freeze 75 is tailored to specific industrial and workshop applications — the most important features and areas of application are listed below.
CRC SPRAY FREEZE 75 is a fast-acting aerosol cooling spray for detecting thermal problems—typical applications in electronics troubleshooting, diagnosing loose connections, cold solder joints, and thermally induced component failures. Targeted cooling to well below zero degrees Celsius allows for the precise identification of defective components. 200 g aerosol can. See SDS for detailed application data.
What makes CRC Spray Freeze 75 stand out
What is CRC Spray Freeze 75 used for?
Processing
Recommended accessories
Technical data for CRC SPRAY FREEZE 75 (200 g)
| Product Information | |
|---|---|
| Brand | CRC |
| Container | 200 ml |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.
Frequently asked questions about CRC Spray Freeze 75
Application and compatibility questions from practice — answered by SILITECH.
CRC SPRAY FREEZE 75 (200 g): Fast-acting cooling spray for detecting thermal problems on electronic components — immediate, localized cooling deep below zero, helpful for troubleshooting and maintenance. Main applications: Electronics troubleshooting, solder joint diagnostics, service engineering.
Cooling sprays use evaporating propellant to rapidly cool the sprayed area—typically well below zero degrees Celsius. In electronics diagnostics, this allows for the targeted cooling of individual components, solder joints, or sensors. Loose connections, cold solder joints, and thermally induced component defects become apparent through changes in function upon cooling. Important safety instructions: do not spray on hot surfaces, ensure adequate ventilation—detailed instructions can be found in the SDS.
No. Silicone sprays leave a water-repellent silicone film that prevents the adhesion of paints, adhesives, and coatings. Do not apply to surfaces that will later be painted or overlaid, or clean thoroughly beforehand with SILISIL Silicone Remover.
Store aerosol can below +50 °C, protect from direct sunlight, keep away from ignition sources. Pressure container — do not forcibly open or incinerate, even after use. In unopened original packaging, shelf life according to SDS — observe the printed expiry date.
Safety: Do not spray on hot surfaces or open flames, ensure adequate ventilation, and observe ESD protection measures. Application: Spray sparingly and briefly – overdosing can lead to frost damage to sensitive components. Diagnosis: Check function immediately after spraying – defective components will show signs of malfunction upon cooling. Detailed instructions: Consult the SDS and application guide.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Brand | CRC |
| Container | 200 ml |
| Keywords | |
|---|---|
| Keywords | |