LOCTITE 406 – Instant adhesive for bonding plastic and rubber
Low-viscosity instant adhesive, ideal for plastics and elastomers. For difficult materials, use with primer SF 770.
LOCTITE 406 – Instant adhesive for bonding plastic and rubber is a cyanoacrylate adhesive from the Loctite brand. Available in 20 ml containers.
Internal reference:
49-406.FL.ML020
HS code:
35061000
Product Description
LOCTITE 406 is a one-component, transparent cyanoacrylate-based superglue. Its special formula ensures extremely fast setting and high final strength, particularly on plastics and rubber. Thanks to its low viscosity, LOCTITE 406 flows reliably into the finest gaps, enabling invisible, highly stable bonds with minimal adhesive gaps.
Curing occurs through exposure to atmospheric humidity, achieving a high degree of handling strength within seconds – ideal for manufacturing processes, repairs, assembly, or model making. After 24 hours, the bond is fully load-bearing and resistant to many chemicals and temperature fluctuations. LOCTITE 406 is universally applicable and adheres excellently to modern engineering plastics such as ABS, PVC, polycarbonate, and phenolic resin, as well as to classic elastomers such as neoprene and nitrile rubber.
Due to its fast and reliable curing, LOCTITE 406 is ideally suited for industrial manufacturing, apparatus and plant construction, as well as all assembly and repair work where fast process times and maximum precision are required.
Product properties
- Color: transparent, colorless to straw-colored
- Chemistry: Ethyl cyanoacrylate (one-component, no mixing required)
- Viscosity (25 °C): 12–25 mPa·s (very low viscosity)
- Curing: through humidity, extremely fast fixing (depending on the material 5–45 seconds)
- Final strength: after 24 hours
- Tensile shear strength (steel): up to 15.5 N/mm²
- Temperature range: -40 °C to +120 °C
- Storage: optimal at 2–8 °C, unopened shelf life at least 12 months
Suitable materials
- Plastics: ABS, PVC, polycarbonate, phenolic resin
- Elastomers: Neoprene, Nitrile Rubber, Buna-N
- Metals: steel, aluminium, galvanised and coated surfaces (a primer can be used for plastics with low surface energy)
Typical application areas
- Manufacturing and repair of plastic parts
- Bonding of rubber parts, seals and profiles
- Fastening of small components in electronics, precision mechanics and model making
- Bonding of hoses, cable glands, sensors
- Applications in automotive, equipment and plant engineering
- Precision assembly and repairs in everyday life
Processing instructions
- Preparation: Keep bonding surfaces clean and free of grease (pretreat with LOCTITE cleaner if necessary).
- Primer: A primer can be used for plastics that are difficult to bond.
- Instructions: Apply a drop of LOCTITE 406 to one of the surfaces, immediately join them together and hold briefly.
- Fixation: The adhesive reaches hand strength within a few seconds, and full final strength after approximately 24 hours.
- Cleaning: Excess, uncured adhesive can be removed with acetone.
Note: LOCTITE 406 is specially optimized for demanding bonding applications involving plastic and rubber, and impresses with its maximum speed and reliability.
Technical data for LOCTITE 406 – Instant adhesive for bonding plastic and rubber
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 20 ml |
| Recommended for use with | Plastic, rubber, elastomer |
| Operating temperature | -40.0 °C - 120.0 °C |
| Technology | Cyanoacrylate |
| Physical Properties | |
|---|---|
| Color | Crystal clear |
| Alignment time | 30 seconds |
| Curing technology | Moisture curing |
| Viscosity at 25°C | 20.0 mPa·s (cP) |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | 0.12 mm |
| Shear strength, mild steel (sandblasted) | 15.5 N/mm² ( 2250.0 psi ) |
| General | |
|---|---|
| Applications | Bonding of plastics, bonding of elastomers |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Brand | Loctite |
| Container | 20 ml |
| Recommended for use with | Plastic, rubber, elastomer |
| Operating temperature | -40.0 °C - 120.0 °C |
| Technology | Cyanoacrylate |
| Physical Properties | |
|---|---|
| Color | Crystal clear |
| Alignment time | 30 seconds |
| Curing technology | Moisture curing |
| Viscosity at 25°C | 20.0 mPa·s (cP) |
| Mechanical properties | |
|---|---|
| Maximum gap filling capacity | 0.12 mm |
| Shear strength, mild steel (sandblasted) | 15.5 N/mm² ( 2250.0 psi ) |
| Uncategorized | |
|---|---|
| Applications | Bonding of plastics, bonding of elastomers |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: