)
)
Neukadur Wax Release Spray P6 (500 ml)
External wax release agent for UP and EP resins as an aerosol with propane/butane propellant.
External wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for polyester and epoxy resin processing in professional model and mold making
Documents
Internal reference:
41-829.SP.ML500
HS code:
39100000
Neukadur Wachs-Trennspray P6 (500 ml) is an external wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for polyester and epoxy resin processing in professional model and mold making.
Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for clean demolding of polyester, epoxy, and polyurethane resins in model making, boat building, automotive bodywork, and industrial construction. Neukadur P6 is tailored to specific industrial and workshop applications — the most important properties and areas of use are listed below.
Neukadur Wax Release Spray P6 is an external wax release agent for unsaturated polyester (UP) and epoxy resin systems (EP). Aerosol with propane/butane propellant, white color, 3% active ingredient. Stirring before use is important — bring to room temperature for even spray distribution. Standard release solution in composite model making.
What sets Neukadur P6 apart
What is Neukadur P6 used for?
Processing
Recommended accessories
Neukadur P6 in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
Neukadur P6 Current Product |
Wax Release Spray G&P → | Release Spray TRS → | SG-1001S → | |
|---|---|---|---|---|
| Active ingredient base | Wachs | Wachs | Wachs | Silicone |
| Silicone status | silicone-free | silicone-free | silicone-free | silicone-containing |
| Thermal Stability | see TDS | +90 °C | +120 °C | see TDS |
| Suitable resins | UP, Epoxy | UP, epoxy, PMMA, PU, silicone rubber | Epoxy, Polyester, PU | PU, Epoxy, Thermoplastics |
| Main application | UP/EP Release Spray | Universal Wax Release Spray | Composite release spray | Universal Release Spray |
Technical data for Neukadur Wax Release Spray P6 (500 ml)
| Product Information | |
|---|---|
| Container | 500 ml |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Documents and data sheets
Click on a document for the preview or the download icon for direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about Neukadur P6
Application and compatibility questions from practice — answered by SILITECH.
Neukadur Wax Release Spray P6 (500 ml): External wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for polyester and epoxy resin processing in professional model and mold making. Main applications: polyester composite model making, epoxy resin laminates, sports equipment and model making.
For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, Wax Release Spray G&P, Release Spray TRS) — silicone-free, they leave the component paintable/glueable. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release reserve. For each application: thin, even coat, allow to flash off — often repeated waxing before the first pour on new molds.
No. Silicone sprays leave a water-repellent silicone film that prevents the adhesion of paints, adhesives, and coatings. Do not apply to surfaces that will later be painted or overlaid, or clean thoroughly beforehand with SILISIL Silicone Remover.
Store aerosol can below +50 °C, protect from direct sunlight, keep away from ignition sources. Pressure container — do not forcibly open or incinerate, even after use. In unopened original packaging, shelf life according to SDS — observe the printed expiry date.
Polyester/Epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane challenges: ACHEM SG-1001S with highest release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration No. 155325. If uncertain about material compatibility, always perform a small test pour.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Container | 500 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: