)
)
Neukadur Wax Release Spray P6 (500 ml)
External wax release agent for UP and EP resins as an aerosol with propane/butane propellant.
External wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for polyester and epoxy resin processing in professional model and mold making
Documents
Internal reference:
41-829.SP
HS code:
391000000
Neukadur Wax Release Spray P6 (500 ml) is an external wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for polyester and epoxy resin processing in professional model and mold making.
Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for the clean demolding of polyester, epoxy, and polyurethane resins in model making, boat building, automotive body construction, and industrial applications. Neukadur P6 is tailored to specific industrial and workshop applications — the most important properties and areas of application can be found below.
Neukadur Wax Release Spray P6 is an external wax release agent for unsaturated polyester (UP) and epoxy resin (EP) systems. Aerosol with propane/butane propellant, white in color, 3% active ingredient. Stirring before use is important—bring to room temperature for even spray distribution. Standard release solution in composite model making.
What distinguishes Neukadur P6
What is Neukadur P6 used for?
processing
Recommended accessories
Neukadur P6 in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
Neukadur P6 Current product |
G&P Wax Release Spray → | TRS release spray → | SG-1001S → | |
|---|---|---|---|---|
| Active ingredient base | wax | wax | wax | silicone |
| Silicone status | silicone-free | silicone-free | silicone-free | Contains silicone |
| Heat stability | see TDS | +90 °C | +120 °C | see TDS |
| Suitable resins | UP, epoxy | UP, epoxy, PMMA, PU, silicone rubber | Epoxy, polyester, PU | PU, epoxy, thermoplastics |
| Main application | UP/EP release spray | Universal wax release spray | Composite release spray | Universal release spray |
Technical data for Neukadur Wax Release Spray P6 (500 ml)
| Product information | |
|---|---|
| Container | 500 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about Neukadur P6
Practical questions regarding application and compatibility — answered by SILITECH.
Neukadur Wax Release Spray P6 (500 ml): External wax release agent for UP and EP resins as an aerosol with propane/butane propellant — 3% active ingredient, ideal for processing polyester and epoxy resins in professional model and mold making. Main applications: Polyester composite model making, epoxy resin laminates, sporting goods and model making.
For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, G&P wax release spray, TRS release spray) — silicone-free, they allow the component to be painted/bonded. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release resistance. For each application: apply a thin, even coat, allow to flash off — often several coats of wax are necessary before the first casting with new molds.
No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.
Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.
Polyester/epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane difficulties: ACHEM SG-1001S with maximum release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration no. 155325. If unsure about material compatibility, always make a small test casting.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Container | 500 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: