PERMABOND ES558
Permabond ES558 — Epoxy structural adhesive, viscosity 100000-300000 mPa·s, Shore D 80-85.
1K heat-curing epoxy adhesive — industry standard.
Documents
Internal reference:
49-558.KT.ML320
HS code:
3506.9190000
Permabond ES558 is a 1K epoxy adhesive for heat curing — industrial application with heat-cure infrastructure.
1K standard epoxy for industrial heat-cure bonding.
1K epoxy resin adhesive for heat curing — standard industrial variant without pot life limitation.
What distinguishes Permabond ES558
What is Permabond ES558 used for?
Processing
Recommended accessories
Important Notes
Which Permabond 1K epoxy for which application?
Permabond ES558 in direct comparison with related products of the ES series.
Permabond ES558 Current Product | Permabond ES550 → | Permabond ES578 → | Permabond ES562 → | |
|---|---|---|---|---|
| Application | Standard 1K epoxy — heat curing | Comparable | Flame-retardant | Standard EN variant |
| Chemistry | One-component epoxy resin (heat-cure) | 1K epoxy | 1K epoxy | 1K epoxy |
| Curing | Heat curing | Heat-cure | Heat-cure | Heat-cure |
Technical data for PERMABOND ES558
| Product Information | |
|---|---|
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Brand | Permabond |
| Container | 320 ml |
| Country of origin | Italy |
| UFI (Unique Formula Identifier) | S9K0-R0GF-Y00T-JP9P |
| Cure speed (oven) | |
|---|---|
| 130° C | 75 minutes |
| 150°C | 60 minutes |
| 170°C | 40 minutes |
| Performance at Full Cure | |
|---|---|
| Shear strength (steel ISO10123) | >14 N/mm² |
| Impact strength (ASTM D-950) | 25-35 kJ/m² |
| Thermal conductivity | 0.9 W/(mK) |
| Physical Properties | |
|---|---|
| Color | silver-grey |
| Chemical group | Epoxy resin |
| Viscosity (adhesives) | High viscosity >5000 mPas |
| Viscosity mPa.s | 100000-300000 |
| Specific Gravity | 1.5 |
| Curing values | |
|---|---|
| Maximum gap fill (mm) | 0.5 |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 80-85 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Steel | 27 - 41 N/mm² |
| Aluminum | 17 - 31 N/mm² |
| Zinc | 14 - 27 N/mm² |
| Thermal Properties | |
|---|---|
| Operating temperature (°C) | -40 to +180 |
| Storage Temperature (°C) | 2-7 |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Documents and data sheets
Click on a document for the preview or the download icon for direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Permabond ES558
Practical application and design questions — answered by SILITECH.
One-component (1K) epoxy adhesive for heat curing — industrial application with no pot life. One-component epoxies are processed directly without mixing and cured in a single heat-cure step.
1K epoxies are processed directly from the container without mixing — no pot life limitation, no mixing errors. Disadvantage: heat curing required (industrial oven, IR lamp, or hot air). 2K epoxies cure at room temperature but require precise mixing and have a limited pot life. 1K is suitable for line production with heat-cure infrastructure, 2K for workshops without an oven.
Heat curing. For exact conditions, refer to the Permabond TDS — typically 30 minutes at 150 °C or equivalent heat input (e.g., 60 min @ 120 °C).
1K heat-cure epoxies bond metals (steel, aluminum, copper), composites (CFK, GFK), ceramics, and selected plastics (with heat resistance). Substrates must tolerate the curing temperature (typically 150 °C).
Permabond ES558 does not have specific industry approvals such as UL94-V0 (see ES578 for the flame-retardant version). For general industrial applications, the product is approved according to Permabond standards.
At 5 to 25 °C. 1K heat-cure epoxies have limited storage stability — reactivity decreases with higher storage temperature. For long shelf life, store refrigerated. Allow adhesive to warm to room temperature before opening.
From the Permabond 1K epoxy range: Permabond ES558 (standard 1K epoxy — heat cure); Permabond ES550 (standard 1K); Permabond ES578 (UL94-V0); Permabond ES562 (single-part heat cure). For UL94-V0 fire protection, see ES578; for high temperature, see ES566/ES569; for IR/hot air curing (without an industrial oven), see ES5691.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Brand | Permabond |
| Container | 320 ml |
| Country of origin | Italy |
| UFI (Unique Formula Identifier) | S9K0-R0GF-Y00T-JP9P |
| Cure speed (oven) | |
|---|---|
| 130° C | 75 minutes |
| 150°C | 60 minutes |
| 170°C | 40 minutes |
| Performance at Full Cure | |
|---|---|
| Shear strength (steel ISO10123) | >14 N/mm² |
| Impact strength (ASTM D-950) | 25-35 kJ/m² |
| Thermal conductivity | 0.9 W/(mK) |
| Physical Properties | |
|---|---|
| Color | silver-grey |
| Chemical group | Epoxy resin |
| Viscosity (adhesives) | High viscosity >5000 mPas |
| Viscosity mPa.s | 100000-300000 |
| Specific Gravity | 1.5 |
| Curing values | |
|---|---|
| Maximum gap fill (mm) | 0.5 |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 80-85 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Steel | 27 - 41 N/mm² |
| Aluminum | 17 - 31 N/mm² |
| Zinc | 14 - 27 N/mm² |
| Thermal Properties | |
|---|---|
| Operating temperature (°C) | -40 to +180 |
| Storage Temperature (°C) | 2-7 |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download:
- Permabond ES558 - Technical Data Sheet FR.pdf (348 KB)
- Permabond ES558 - Fiche de Sécurité FR.pdf (401 KB)
- Permabond ES558 - Safety Data Sheet EN.pdf (380 KB)
- Permabond ES558 - Safety Data Sheet DE.pdf (402 KB)
- Permabond ES558 - Technical Data Sheet EN.pdf (371 KB)
- Permabond ES558 - Technical Data Sheet DE.pdf (379 KB)