Silicones, silicone oils, sprays
Casting and potting resins)
)
PERMABOND TA 4620
Toughened 2-component acrylate structural adhesive (methacrylate) for polyolefins; mixing ratio 1:1 by volume; for PP and PE without primer;
pot life 10–14 min at 23 °C; functional strength 24–72 h; final strength 7 days
PERMABOND TA 4620 is a 2-component acrylic adhesive in a 1:1 ratio, especially for PP and PE. Packaging and availability upon request.
PERMABOND TA 4620 is a two-component acrylic adhesive in a 1:1 mixing ratio. According to the Permabond data sheet, it was specifically developed for polypropylene and polyethylene. Its suitability for your specific material combination should be verified.
Technical data for PERMABOND TA 4620
| Product Information | |
|---|---|
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 50 ml, 400 ml |
| Mixing Ratio | 1:1 |
| Working time (pot life) at 25°C | 10-14 minutes |
| Physical Properties A | |
|---|---|
| Chemical Group (A) | Methacrylate |
| Color (A) | Greyish-white |
| Viscosity (A) | 200000-500000 |
| Specific gravity (A) | 1.0 |
| UFI Part A | 8P01-Q05D-S000-RX6R |
| Physical Properties B | |
|---|---|
| Chemical Group (B) | Methacrylate |
| Color (B) | Colorless |
| Viscosity (B) | 20000-30000 |
| Specific Gravity (B) | 1.0 |
| UFI Part B | PS01-60UT-200H-E8ST |
| Performance at Full Cure | |
|---|---|
| Shear strength polycarbonate | >5 N/mm² |
| Shear strength PVC | >4 N/mm² |
| Bonding Properties | |
|---|---|
| Maximum gap filling capacity up to | 1.0mm |
| Handling strength at 23°C | 60-90 minutes |
| Functional Strength | 24-72 hours |
| Final strength at 23°C | 7 days |
| Physical Properties | |
|---|---|
| Viscosity mPa.s | 210000 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Polypropylene | 3-5 N/mm² |
| Aluminum | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| Polyethylene | 3-5 N/mm² |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 2-7 |
| Operating temperature (°C) | -55 to 100 |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No frequently asked questions are available for this product.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 50 ml or 400 ml |
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Mixing Ratio | 1:1 |
| Working time (pot life) at 25°C | 10-14 minutes |
| Physical Properties A | |
|---|---|
| Chemical Group (A) | Methacrylate |
| Color (A) | Greyish-white |
| Viscosity (A) | 200000-500000 |
| Specific gravity (A) | 1.0 |
| UFI Part A | 8P01-Q05D-S000-RX6R |
| Physical Properties B | |
|---|---|
| Chemical Group (B) | Methacrylate |
| Color (B) | Colorless |
| Viscosity (B) | 20000-30000 |
| Specific Gravity (B) | 1.0 |
| UFI Part B | PS01-60UT-200H-E8ST |
| Performance at Full Cure | |
|---|---|
| Shear strength polycarbonate | >5 N/mm² |
| Shear strength PVC | >4 N/mm² |
| Bonding Properties | |
|---|---|
| Maximum gap filling capacity up to | 1.0mm |
| Handling strength at 23°C | 60-90 minutes |
| Functional Strength | 24-72 hours |
| Final strength at 23°C | 7 days |
| Physical Properties | |
|---|---|
| Viscosity mPa.s | 210000 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Polypropylene | 3-5 N/mm² |
| Aluminum | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| Polyethylene | 3-5 N/mm² |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 2-7 |
| Operating temperature (°C) | -55 to 100 |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: