Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- CRC
- Manufacturer
- CRC
- Container
- 500 ml
- Freezing point
- -57 °C
- Temperature resistance
- -25 to 250
Physical Properties
- Density
- 0.83
- Odor
- Odorless
Product Description
CRC Ejector Lube Spray is a fully synthetic high-temperature lubricating oil up to +250 °C — NSF H1 registered (158477), silicone-free, non-flammable, with 360° spray valve for ejector pins and guide bolts in injection molding machines.
Industrial lubricating sprays for injection molding and workshop applications — from NSF-H1 high-temperature lubricant for ejector pins to the universal workshop glide spray. CRC Ejector Lube is tailored to specific industrial and workshop applications — you will find the most important properties and areas of application below.
CRC Ejector Lube Spray is a fully synthetic, non-flammable high-temperature lubricating oil — specially developed for ejector pins and guide pins in injection molding machines. NSF H1 registered (Reg. No. 158477) for food-contact machine parts. Silicone-free, leaves no residues on molded parts, does not gum up. With practical 360° spray valve — sprays even upside down.
What sets CRC Ejector Lube apart
What is CRC Ejector Lube used for?
Processing
Recommended accessories
CRC Ejector Lube in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
CRC Ejector Lube Current Product |
Zellweger Gleitspray → | Silicone Spray STM 835 → | |
|---|---|---|---|
| Type | High-temperature lubricant | Universal sliding spray | — |
| Active ingredient base | Fully synthetic oil | see SDS | — |
| Temperature range | −25 / +250 °C | see SDS | −25 / +250 °C |
| Certification | NSF H1 Reg. 158477 | Industry standard | — |
| Main application | Ejector Pins Injection Molding | Workshop lubrication | Pharma & Food |
Frequently Asked Questions about CRC Ejector Lube
Application and compatibility questions from practice — answered by SILITECH.
CRC Ejector Lube Spray: Fully synthetic high-temperature lubricating oil up to +250 °C — NSF H1 registered (158477), silicone-free, non-flammable, with 360° spray valve for ejector pins and guide pins in injection molding machines. Main applications: ejector pins injection molding, guide pins injection molding, high-temperature precision mechanisms.
Lubricating sprays are the quick solution for friction points in injection molding tools, bearing components, guide elements, and maintenance applications. For food machinery parts with indirect contact (NSF H1), CRC Ejector Lube Spray is the standard solution — fully synthetic, +250 °C, silicone-free. For general workshop lubrication without special requirements, Zellweger Gleitspray is a universal tool. For sensitive materials (polycarbonate, elastomers), consider SILISIL Premium Silicone Spray with high-purity PDMS.
No. Silicone sprays leave a water-repellent silicone film that prevents the adhesion of paints, adhesives, and coatings. Do not apply to surfaces that will later be painted or overlaid, or clean thoroughly beforehand with SILISIL Silicone Remover.
Store aerosol can below +50 °C, protect from direct sunlight, keep away from ignition sources. Pressure container — do not forcibly open or incinerate, even after use. In unopened original packaging, shelf life according to SDS — observe the printed expiry date.
Injection Molding + Food Contact: CRC Ejector Lube Spray — fully synthetic up to +250 °C, NSF H1 registered (Reg. 158477). Universal Workshop: Zellweger Gleitspray — general lubrication on friction and sliding surfaces. Sensitive Materials: SILISIL Premium Silicone Spray for polycarbonate, EPDM, NBR. Pharma/Food with Dimeticone EP: SILISIL Silicone Spray STM 835 Medical up to +250 °C.