)
SILBIONE Oil 70047 V 100
Medically approved linear PDMS oil from the Silbione range.
Medically approved linear PDMS oil (100 mm²/s) from the Silbione series — biocompatible for medical and pharmaceutical applications
Documents
HS Code:
39100000
Silbione Huile 70047 V 100 is a medically approved linear PDMS oil (100 mm²/s) from the Silbione range — biocompatible for medical and pharmaceutical applications.
Bluesil/Silbione polydimethylsiloxane oils (PDMS) — chemically inert, thermally stable, with defined viscosity for use as lubricants, separators, dielectrics, hydraulic fluids, and heat transfer fluids. Silbione 70047 V 100 is tailored to specific applications — the most important properties and areas of use are listed below.
Silbione Huile 70047 V 100 is a medically approved polydimethylsiloxane — biocompatible, tested for medical and pharmaceutical applications. Low viscosity (100 mm²/s) for a wide range of pharmaceutical, skincare, and medical device applications.
What distinguishes Silbione 70047 V 100
What is Silbione 70047 V 100 used for?
Processing
Silbione 70047 V 100 in comparison
Direct comparison with related fluid products from our range. "— " = not specified in the data sheet.
Silbione 70047 V 100 Current Product |
Silbione 70047 V 350 → | Silbione DM 300 GMP → | Silbione 70047 V 12500 → | |
|---|---|---|---|---|
| Product Type | PDMS, Medical Grades | PDMS, Medical Grades | Dimethicone, GMP | PDMS, Pharma-Grade |
| Viscosity @25 °C | 100 mm²/s | 350 mm²/s | 300 cSt | 12,500 mm²/s |
| Density @25 °C | 0.965 | 0.970 | 0.97 | 0.970 |
| Flash point | ≥+300 °C | ≥+300 °C | see TDS | ≥+300 °C |
| Pour point | −55 °C | −50 °C | — | — |
| Refractive index | 1.403 | 1.403 | 1.403 | 1.403 |
| Main application | Medicine / Pharmaceuticals | Medicine / Dermatology | Pharma Excipient (GMP) | Premium pharmaceuticals / cosmetics |
Technical data for SILBIONE Huile 70047 V 100
| Product Information | |
|---|---|
| Brand | Silbione |
| Manufacturer | Elkem Silicones |
| Container | 1 kg, 5 kg, 200 kg |
| Number of components | 1K (one-component) |
| Consistency | Flowable |
| Mixing Ratio | One-component |
| Further Properties | |
|---|---|
| UV resistance | Yes |
| Physical Properties | |
|---|---|
| Cured Color | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 100 cSt |
| Density (g/cm³) | 0.966 g/cm³ |
| Uncrosslinked viscosity (mPa·s) | 90 |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | Yes |
| Medical grade | Yes |
| Thermal Properties | |
|---|---|
| Flash point (°C) | 305 °C |
| Pour point (°C) | -55 °C |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Documents and data sheets
Click on a document for the preview or the download icon for direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Silbione 70047 V 100
Practical application and design questions — answered by SILITECH.
Silbione Oil 70047 V 100: Medically approved linear PDMS oil (100 mm²/s) from the Silbione range — biocompatible for medical and pharmaceutical applications. Main applications: Medical device applications, pharmaceutical excipients, skincare component.
PDMS (Polydimethylsiloxane) is a linear silicone fluid with high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (in mm²/s = cSt) determines the field of application — low viscosities for volatile lubrication and hydraulics, high viscosities for antifoam, damping, and care conditioning.
Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.
In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 1 kg or 5 kg or 200 kg |
| Brand | Silbione |
| Manufacturer | Elkem Silicones |
| Number of components | 1K (one-component) |
| Consistency | Flowable |
| Mixing Ratio | One-component |
| Further Properties | |
|---|---|
| UV resistance | Yes |
| Physical Properties | |
|---|---|
| Cured Color | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 100 cSt |
| Density (g/cm³) | 0.966 g/cm³ |
| Uncrosslinked viscosity (mPa·s) | 90 |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | Yes |
| Medical grade | Yes |
| Thermal Properties | |
|---|---|
| Flash point (°C) | 305 °C |
| Pour point (°C) | -55 °C |
| Keywords | |
|---|---|
| Keywords | |
| Processing | |
|---|---|
| Viscosity of Mixture | 100 mPa·s |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 0.97 g/cm³ |
| Refractive index n (20°C) | 1.403 |
| Temperature Resistance (Continuous) | -50 to 200 °C |
| Peak Temperature (Short-term) | 200 °C |
| Thermal conductivity | 0.16 W/(m·K) |
| Storage | |
|---|---|
| Shelf life in original packaging | 36 months |
| Storage Temperature | -20 to 50 °C |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download:
- Silbione FLD 70047V100 - Fiche Technique FR.pdf (136 KB)
- Silbione FLD 70047V100 - Fiche de Sécurité FR.pdf (381 KB)
- Silbione FLD 70047V100 - Scheda di Sicurezza IT.pdf (371 KB)
- Silbione FLD 70047V100 - Safety Data Sheet DE.pdf (186 KB)
- Silbione FLD 70047V100 - Technical Data Sheet EN.pdf (526 KB)
- Silbione FLD 70047V100 - Technical Data Sheet DE.pdf (137 KB)