Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Container
- 100g, 250g, 1kg, 5kg, 20kg
Product Description
Calsil Grease 55 is the Calsil variant of the pneumatics-specific lithium soap silicone grease standard — for dynamic lubrication between rubber and metal.
Bluesil silicone greases — lithium-soap-thickened silicone oils for lubrication in a wide temperature range (-70 to +200 °C), oxidation-stable, water-repellent. Calsil GRS 55 is tailored to specific applications — the most important properties and areas of application can be found below.
Calsil Grease 55 is the Calsil variant of the proven pneumatic grease standard — for dynamic lubrication between rubber and metal in pneumatic applications. Detailed specifications available from SILITECH.
What makes Calsil GRS 55 stand out
What is Calsil GRS 55 used for?
Processing
Recommended accessories
Calsil GRS 55 in comparison
Direct comparison with related grease products from our range. "— " = not specified in the data sheet.
Calsil GRS 55 Current Product |
GRS 55 NG → | Calsil GRS 33 → | GRS 33 NG → | |
|---|---|---|---|---|
| Thickener | Lithium soap | Lithium soap | Lithium soap | Lithium soap |
| Penetration | see TDS | 290 (1/10 mm) | see TDS | 280 (1/10 mm) |
| Dropping point | see TDS | 220 °C | see TDS | 226 °C |
| Temperature Range | see TDS | –65 / +175 °C | see TDS | –70 / +200 °C |
| Color | see TDS | Off-white | see TDS | Off-white |
| Main application | Pneumatic Lubrication | Pneumatic Lubrication | Industrial Lubrication | Ball Bearing Extreme Temperature |
Frequently asked questions about Calsil GRS 55
Practical application and design questions — answered by SILITECH.
Calsil Grease 55: Calsil variant of the pneumatics-specific lithium soap silicone grease standard — for dynamic lubrication between rubber and metal. Main applications: pneumatic lubrication, O-rings and seals, pneumatic actuators.
Prepare the surfaces to be lubricated clean, dry, and degreased. Silicone grease is not compatible with mineral greases — carefully remove any old mineral grease beforehand. Apply with a brush, spatula, or grease gun. Important: Silicone greases must not be used for lubricating oxygen systems (explosion hazard).
Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.
In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).