Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Container
- 400 ml
- Viscosity (mPa.s)
- 20 - 30
- Viscosity (mPa.s)
- 20 - 30
Performance at Full Cure
- Dielectric strength
- ≥ 80 kV/mm
- Dielectric strength
- ≥ 80 kV/mm
- Volume Resistivity
- ≥ 1.10^14 Ω.cm
- Volume Resistivity
- ≥ 1.10^14 Ω.cm
Physical Properties
- Color
- colorless, slightly cloudy
- Color
- colorless, slightly cloudy
- Density
- 0.80-0.95
- Density
- 0.80-0.95
- Solid content
- 34 - 38 %
- Solid content
- 34 - 38 %
Features
- Recommended film thickness
- 20 - 40 μ
- Recommended film thickness
- 20 - 40 μ
- Drying time (touchable)
- 30-60 min
- Drying time (touchable)
- 30-60 min
- Dry season (hard)
- 24 h
- Dry season (hard)
- 24 h
- Surface resistivity
- ≥ 1.10^12 Ω
- Surface resistivity
- ≥ 1.10^12 Ω
Product Description
DESCRIPTION
Insulating varnish for the protection of printed circuit boards, electrical windings and fixed assemblies, which can also be used in humid conditions.
CHARACTERISTICS
- Perfect insulation.
- Quick-drying at room temperature and relative humidity, drying time can be accelerated in the oven.
- Excellent thermal conductivity.
- Resistant to mechanical shocks.
- Allows soldering without removing the protective film.
- Contains a UV tracer that produces a fluorescent blue reflection when exposed to UV radiation.
APPLICATIONS
Diverse applications in the electronics and electrical industries, aerospace, automotive industry, marine and telecommunications.
INSTRUCTIONS FOR USE
Before applying Electrofuge 200, the parts to be treated must be thoroughly degreased.
- Aerosol: Shake well for at least one minute after the mixing ball is free. Spray Electrofuge 200 from a distance of 25 cm from the surface. Apply several thin, cross-hatched coats, ensuring the paint does not run.
- Brush or spray gun: It is recommended to dilute the product 5 to 20% with thinner. Carefully apply to the parts to be treated.
- Immersion: Preferred technique for protecting the underside of components for use in aggressive environments. Immerse and drain off excess product.
Silicone-based, insulating protective coating with UV tracer.
Your dynamic snippet will be displayed here ... This message is displayed because you have not provided a filter or a template to use.