Zellweger Lubricant Spray
Universal lubricant spray for sliding and friction points in industry and workshops.
Universal lubricant spray for sliding and friction points in industry and workshops — as an aerosol can with even spray application for a clean lubrication pattern even in hard-to-reach places
Documents
Internal reference:
41-831.SP
HS code:
39100000
Zellweger Gleitspray is a universal lubricant spray for sliding and friction points in industry and workshops — as an aerosol can with even spray application for a clean lubrication pattern even in hard-to-reach places.
Industrial lubricating sprays for injection molding and workshop applications — from NSF H1 high-temperature lubricant for ejector pins to universal workshop lubricant. Zellweger lubricant sprays are tailored to specific industrial and workshop applications — the most important properties and areas of application can be found below.
Zellweger Lubricating Spray is an industrial lubricant for sliding and friction surfaces in workshops and production facilities. Its aerosol format allows for even, thin application in hard-to-reach areas. For detailed application data, see the SDS and application notes. For specific requirements involving high temperatures, food contact, or pharmaceuticals, we recommend the specialized variants from the SILITECH range.
What makes Zellweger lubricant spray stand out
What is Zellweger lubricant spray used for?
processing
Recommended accessories
Zellweger Lubricant Spray in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
Zellweger Lubricant Spray Current product |
CRC Ejector Lube → | Silicone spray 500 ml → | |
|---|---|---|---|
| type | Universal lubricant spray | High-temperature lubricant | — |
| Active ingredient base | see SDS | Fully synthetic oil | — |
| Temperature range | see SDS | -25 / +250 °C | +200 °C |
| Certification | Industry standard | NSF H1 Reg. 158477 | — |
| Main application | Workshop lubrication | Ejector pins injection molding | All-round workshop |
Technical data for Zellweger lubricant spray
| Product information | |
|---|---|
| brand | SILITECH |
| Container | 400 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Frequently asked questions about Zellweger lubricant spray
Practical questions regarding application and compatibility — answered by SILITECH.
Zellweger Lubricating Spray: Universal lubricating spray for sliding and friction points in industry and workshops — as an aerosol can with even spray application for a clean lubrication pattern, even in hard-to-reach areas. Main applications: Workshop lubrication, maintenance and repair, hard-to-reach areas.
Lubricating sprays are the quick solution for friction points in injection molds, bearing components, guide elements, and maintenance applications. For food processing machinery parts with indirect contact (NSF H1), CRC Ejector Lube Spray is the standard solution—fully synthetic, +250 °C, silicone-free. For general workshop lubrication without special requirements, Zellweger Glide Spray is a universal tool. For sensitive materials (polycarbonate, elastomers), try SILISIL Premium Silicone Spray with high-purity PDMS.
No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.
Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.
Injection molding + food contact: CRC Ejector Lube Spray — fully synthetic up to +250 °C, NSF H1 registered (Reg. 158477). Universal workshop: Zellweger Glide Spray — general lubrication of friction and sliding points. Sensitive materials: SILISIL Premium Silicone Spray for polycarbonate, EPDM, NBR. Pharmaceutical/food applications with dimethicone EP: SILISIL Silicone Spray STM 835 Medical up to +250 °C.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| brand | SILITECH |
| Container | 400 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: