)
SILISIL Adhesive Dispensing Gun 50ml (1:1 / 2:1)
DMA 51-00-01 System A-50
SILISIL dispensing gun 50 ml — for double cartridges 1:1 and 2:1.
Precise dispensing of 2-component adhesives and silicones from 50 ml standard cartridges. Available from Swiss warehouse.
Internal reference:
49-810
SILISIL Dispensing Gun 50 ml — for 2K Twin Cartridges (1:1 and 2:1)
The SILISIL 50 ml dispensing gun is a robust manual dispensing gun for 50 ml 2K twin cartridges, designed for the two common mixing ratios of 1:1 and 2:1. The gun is used with static mixing tubes and delivers a uniform, bubble-free dispensing of 2K silicones, adhesives, and potting compounds.
Suitable for all standard 50 ml twin cartridges of the SILISIL range as well as many other manufacturers (Permabond, Scotch-Weld, Sika etc. provided they use the same cartridge format).
Product benefits
- Robust metal construction — for daily workshop and laboratory use
- Universally applicable for 1:1 and 2:1 mixing ratios
- Ergonomic handle with consistent dispensing force
- One-handed operation possible
- Easy to clean, low maintenance
Typical applications
- 2K silicone adhesives: Assembly and potting in workshop and laboratory
- Epoxy and polyurethane adhesives: small series production, sample construction, prototype manufacturing
- Sealing applications: Precise bead dispensing from dual cartridges
- Dental laboratory / Medical technology: Controlled dosing in small volumes
use
- Screw a suitable static mixing tube onto the cartridge
- Insert the cartridge into the gun and secure it with the lever
- Before starting work, apply a few centimeters of pre-mix to homogenize both components in the mixer
- Dispose of the used mixing tube after use; the same mixing tube must not be reused
Storage and care
- Store in a dry and clean place
- Remove hardened adhesive or silicone residue mechanically
- Occasionally lightly grease moving parts
The gun is supplied without a cartridge and without mixing tubes. The matching 50 ml dual cartridges (1:1 or 2:1) and the static mixing tubes can be found separately in the SILITECH shop.
Technical data for SILISIL adhesive dispensing gun 50ml (1:1 / 2:1)
| Product information | |
|---|---|
| Container | 50 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
No public documents are available.
We will gladly send you the TDS and SDS by email upon request; please submit a request.
Frequently asked questions about the SILISIL 50 ml dispensing gun
Answers regarding use, compatibility and maintenance.
The SILISIL 50 ml dispensing gun is designed for standard 50 ml twin cartridges in 1:1 and 2:1 mixing ratios. It is not compatible with 400 ml or 310 ml cartridges, nor with other formats (e.g., 50 ml 10:1).
No. Once set up, static mixing tubes already contain mixed adhesive and harden after a short time. Use a fresh mixing tube for each new step.
All 2K adhesives and 2K silicones supplied in 50 ml twin cartridges with a 1:1 or 2:1 mixing ratio — SILISIL silicones as well as common industrial adhesives from other manufacturers.
Minimal maintenance is required: occasional thorough cleaning and light lubrication of moving parts. With daily use, the pistol will last for many years.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Container | 50 ml |
| Keywords | |
|---|---|
| Keywords | |