)
BLUESIL Paste 340
Thermally conductive silicone paste for thermal bonding between components.
Thermally conductive silicone paste (PDMS + inert fillers) for thermal bonding between components — low viscosity change, dielectrically insulating
Documents
HS code:
39100000
Bluesil Paste 340 is a thermally conductive silicone paste (PDMS + inert fillers) for thermal bonding between components — low viscosity change, dielectrically insulating.
Bluesil/Silbione silicone pastes — filled PDMS compounds for thermal bonding, vacuum sealing, dielectric insulation, and heat conduction applications. Paste 340 is tailored to specific applications — the most important properties and areas of application are listed below.
Bluesil Paste 340 is a thermally conductive silicone paste based on PDMS with inert fillers — good thermal dissipation (0.41 W/m·K), chemically inert, good dielectric properties. Proven in the electronic thermal interface of sensors, resistors and thermal seals.
What makes Paste 340 stand out
What is Paste 340 used for?
processing
Recommended accessories
Paste 340 in comparison
Direct comparison with related paste products in our range. “— " = not specified in the data sheet.
Paste 340 Current product |
Paste 4 → | Paste 408 → | Paste 7 → | |
|---|---|---|---|---|
| consistency | thermal paste | Universal paste | Special paste | Industrial paste |
| penetration | 280 (1/10 mm) | see TDS | see TDS | see TDS |
| Thermal conductivity. | 0.41 W/m·K | see TDS | see TDS | see TDS |
| Temperature range | -40 / +250 °C | see TDS | see TDS | see TDS |
| Color | White | see TDS | see TDS | see TDS |
| Main application | Heat connection electronics | Industrial Universal | Bluesil special application | Industrial lubricant/sealant |
Technical data for BLUESIL Paste 340
| Product information | |
|---|---|
| brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Networking type | Non-reactive |
| Container | 3g, 100g, 100g can, 200g, 500g, 1kg, 2kg, 5kg, 10kg, 20kg, 25kg, 200kg |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about Paste 340
Practical application and design questions — answered by SILITECH.
Bluesil Paste 340: Thermally conductive silicone paste (PDMS + inert fillers) for thermal bonding between components — low viscosity change, dielectric insulating. Main applications: Electronic thermal bonding, sensor thermal sealing, household appliance resistors.
Apply to clean, dry surfaces—degrease beforehand if necessary. Apply with a brush, spatula, or paste gun. Apply thermally conductive pastes thinly and evenly—excess layer thickness reduces thermal conductivity. Pastes can be diluted in aliphatic or chlorinated solvents if thin layers are required.
Store in the unopened original container in a dry, cool place — typically between +5 and +30 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging — Elkem guarantees the product's specifications only until the date shown.
The comparison table above lists related products with similar functions or specifications. If you are unsure which product is best, we would be happy to advise you — contact SILITECH with details of your application (desired properties, substrate, processing workflow).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 3 g or 100 g or 100 g can or 200 g or 500 g or 1 kg or 2 kg or 5 kg or 10 kg or 20 kg or 25 kg or 200 kg |
| brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Networking type | Non-reactive |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Keywords | |
|---|---|
| Keywords | |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 1.8 g/cm³ |
| Temperature resistance (duration) | -40 to 200 °C |
| Peak temperature (short-term) | 200 °C |
| storage | |
|---|---|
| Shelf life in original packaging | 36 months |
| Storage temperature | 2 to 40 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: