Silicones, silicone oils, sprays
Casting and potting resins)
Internal reference:
43-326.DO.K001
HS code:
32089019
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Container
- 1 kg
- UFI (Unique Formula Identifier)
- KPGW-5W66-D20P-0ANU
- Technology
- Lubricant
- Product type
- Solvent-based PTFE dispersion
- Application
- Dry lubricant
- Flash point
- 7 °C
- Diluent
- Butyl acetate, MEK, Ethyl acetate
Physical Properties
- Solid content
- 19.5 %
- Viscosity mPa.s
- 330
- Density
- 0.98
- Color
- transparent
Features
- Lubricant
- PTFE
- Binder
- Thermoplastic
- Coefficient of friction (static)
- 0.07
- Maximum service temperature: continuous
- 80 °C
- Maximum service temperature: intermittent
- 115 °C
- Recommended film thickness
- 5 to 15 μm
Product Description
Bonderite L-GP 325EF Acheson (1 kg) is a solvent-based PTFE dispersion (EMRALON 325 EF) concentrate for coating various substrates — fast-drying, cures at room temperature, transparent coating with high cost-effectiveness.
Bonderite L-GP dry film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that, after drying, form a tightly adhering film with a low coefficient of friction and release properties. L-GP 325EF is tailored to specific industrial applications — the most important properties and areas of application are listed below.
Bonderite L-GP 325EF (formerly EMRALON 325 EF) is a fast-drying, resin-bonded PTFE dry lubricant concentrate for increased cost-effectiveness. It coats wood, metal, rubber, plastic, and glass. Curing occurs at room temperature—ideal for applications where conventional sintered PTFE coatings are unsuitable.
What makes the L-GP 325EF stand out
What is the L-GP 325EF used for?
Processing
Recommended accessories
L-GP 325EF in comparison
Direct comparison with related Bonderite products from our range.
L-GP 325EF Current Product |
L-GP 323 → | L-GP 318 → | L-GP 333-1 EU → | |
|---|---|---|---|---|
| Technology | PTFE solvent concentrate | PTFE Aerosol Dispersion | Water-based PTFE dispersion | Fluorocarbon lubricant in solvent |
| Base material | PTFE + Thermoplastic | PTFE + Thermoplastic | Polytetrafluoroethylene + thermoplastic | Fluorocarbon mixture |
| Carrier | Solvent | Aerosol | Water | Organic solvents |
| Application | Dry film lubrication | Dry film lubrication | Dry film lubrication | Dry film lubrication |
| Temperature range | RT-Cure | RT-Cure | +70/+90 °C | 150 °C Cure |
| Main application | PTFE concentrate | Aerosol PTFE | PTFE water system | Low coefficient of friction |
Frequently asked questions about L-GP 325EF
Practical application and design questions — answered by SILITECH.
Bonderite L-GP 325EF Acheson (1 kg): Solvent-based PTFE dispersion (EMRALON 325 EF) as a concentrate for coating various substrates — fast-drying, cures at room temperature, transparent coating with high cost-effectiveness. Main applications: Moving parts (wood, metal, plastic), door and window guides, saws and planers.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).