Bonderite L-GP D17A Spray is a Bonderite dry film lubricant in aerosol format — detailed specifications and application recommendations available through SILITECH consulting.
Bonderite L-GP dry film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that, after drying, form a firmly adhering film with a low coefficient of friction and release properties. L-GP D17A is tailored to specific industrial applications — the key properties and areas of use are listed below.
Bonderite L-GP D17A Spray is a dry film lubricant in aerosol format from the Henkel Bonderite series. Detailed specifications and application recommendations available through SILITECH.
What sets L-GP D17A apart
What is L-GP D17A used for?
Processing
Recommended accessories
L-GP D17A in comparison
Direct comparison with related Bonderite products from our range.
L-GP D17A Current Product |
L-GP D18A → | L-GP D31 A → | L-GP 323 → | |
|---|---|---|---|---|
| Technology | Dry film lubricant aerosol | MoS₂ aerosol | Lamellar graphite aerosol | PTFE Aerosol Dispersion |
| Base material | Bonderite Series | Molybdenum Disulfide | Pure lamellar graphite | PTFE + Thermoplastic |
| Carrier | Aerosol | Aerosol | Aerosol | Aerosol |
| Application | Dry film lubrication | Extreme Dry Film | High-temperature dry film | Dry film lubrication |
| Temperature range | see TDS | –200/+390 °C | +1'000 °C | RT-Cure |
| Main application | Special dry film | MoS₂ Extreme Lubrication | Lamellar Graphite Spray | Aerosol PTFE |
Technical data for BONDERITE L-GP D17A Spray
| Product Information | |
|---|---|
| Container | 400 ml |
| Manufacturer | Henkel |
| Brand | Bonderite |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
No public documents available.
On request, we will gladly send you TDS and SDS by email, Submit request.
Frequently Asked Questions about L-GP D17A
Practical application and design questions — answered by SILITECH.
Bonderite L-GP D17A Spray: Bonderite dry film lubricant in aerosol format — detailed specification and application recommendation via SILITECH consulting. Main applications: special dry film application, industrial dry film lubrication, OEM application.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Container | 400 ml |
| Manufacturer | Henkel |
| Brand | Bonderite |
| Keywords | |
|---|---|
| Keywords | |