)
)
CAF 730 MF
Versatile bonding, sealing, protecting and maintenance; bonding and sealing in aviation, elastic bonding and protecting of electronic components, metal and plastic bonding, repair and service in industry and transport.
Oxime-curing 1K silicone sealant (thixotropic, white), low odor, corrosion-free for aerospace and electronics
Documents
HS Code:
39100000
CAF 730 MF: One-component thixotropic silicone elastomer, neutral-curing without MEKO, non-sagging, highly extrudable.
CAF 730 MF belongs to the Elkem CAF series of one-component, moisture-curing silicones. Technology: Neutral curing (1K). Sales segment: Aerospace (distribution segment, no regulatory approval).
One-component thixotropic silicone elastomer, neutral-curing without MEKO, non-sagging, highly extrudable.
What makes the CAF 730 MF stand out
What is the CAF 730 MF used for?
Processing
Important Notes
- The currently valid Elkem data sheet (TDS and SDS) is authoritative, which we will be happy to send you.
- Cross-linked by humidity; reseal opened containers tightly.
CAF 730 MF in comparison
Technical data for CAF 730 MF
| Product Information | |
|---|---|
| Brand | CAF |
| Curing type | One-component (moisture curing) |
| Container | 100 g, 310 ml |
| Number of components | 1K (one-component) |
| Consistency | Thixotropic |
| Mixing Ratio | One-component |
| Manufacturer | Elkem Silicones |
| Further Properties | |
|---|---|
| UV resistance | No |
| Physical Properties | |
|---|---|
| Cured Color | White |
| Self-leveling | No |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | No |
| Medical grade | No |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Documents and data sheets
Click on a document for the preview or the download icon for direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about CAF 730 MF
Practical application and design questions — answered by SILITECH.
CAF 730 MF is suitable for bonding and sealing in aviation, elastic bonding and protection of electronics, and flexible joining of metal and plastic components.
CAF 730 MF: Neutral crosslinking (1K).
Continuous use according to Elkem data sheet -55 to 200 degrees C.
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Container | 100 g or 310 ml |
| Brand | CAF |
| Curing type | One-component (moisture curing) |
| Number of components | 1K (one-component) |
| Consistency | Thixotropic |
| Mixing Ratio | One-component |
| Manufacturer | Elkem Silicones |
| Further Properties | |
|---|---|
| UV resistance | No |
| Physical Properties | |
|---|---|
| Cured Color | White |
| Self-leveling | No |
| Electrical Properties | |
|---|---|
| Electrical Insulation | Yes |
| Product Approvals | |
|---|---|
| Food contact | No |
| Medical grade | No |
| Keywords | |
|---|---|
| Keywords | |
| Mechanical properties | |
|---|---|
| Shore hardness A | 24.0 Shore A |
| Modulus at 100% Elongation | 0.5 MPa |
| Tensile Strength | 2.0 MPa |
| Elongation at break | 500.0 % |
| Tear resistance | 5.0 kN/m |
| Processing | |
|---|---|
| Flowability | 2.0 min |
| Skin formation time | 10.0 min |
| Fully cured after 24 hours | 4.6 mm |
| Crosslinking 2 mm layer | 7.0 h |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 1.02 g/cm³ |
| Temperature Resistance (Continuous) | -55 to 200 °C |
| Peak Temperature (Short-term) | 225 °C |
| Thermal conductivity | 0.26 W/(m·K) |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 2.9 |
| Dielectric strength | 19.0 kV/mm |
| Volume resistivity | 4e+15 Ω·cm |
| Dissipation factor tan δ | 0.002 |
| Storage | |
|---|---|
| Shelf life in original packaging | 18 months |
| Storage Temperature | 2 to 30 °C |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: